Tractor is new and the engine is stalling out if the brake is applied while tractor is in gear. Is this normal behavior? I wouldn’t expect it is but not seeing much in the manual about it. Sorry for the noob question, thanks in advance.
Tractor stalls when brake is applied.
2515R Dude
Gold Member
Is it a joke? In this case a funny one, or not so much? You bought a manual trans not knowing how to drive a stick? Good for you
In short, if you do not know how to drive a stick, you definitely professional in google
Here is your friend:
In short, if you do not know how to drive a stick, you definitely professional in google
Here is your friend:
It’s a HST transmission.
2515R Dude
Gold Member
Oh, ok, i thought you told it was in gear, so manual trans come to mind.
By in gear I mean not in neutral and in either Low or High range. Sorry should have been more clear.
Billrog
Veteran Member
- Joined
- Dec 9, 2014
- Messages
- 2,048
- Location
- Armstrong, British Columbia
- Tractor
- Kioti 2610, 580 SuperM Case Backhoe
Is the pedal not returning to neutral when you take your ft off it ?
Eagle1
Veteran Member
- Joined
- Jul 4, 2003
- Messages
- 2,308
- Location
- Viburnum, MO
- Tractor
- Kubota BX2200, LS XG3135H, Grasshopper and Yazoo Zturns
Are you jamming on the brake while still standing on the HST pedal? I rarely use the brake just use the HST to slow or stop, brake only when holding position on steep hill or inching nose down into really steep place.
My little BX used to almost throw you onto the hood if you let of the HST pedal to fast.
My little BX used to almost throw you onto the hood if you let of the HST pedal to fast.
2515R Dude
Gold Member
Sorry for misunderstanding. Being a guy with a stick, lol, I have no experience with HST, but to me it does not sound normal.
Portuguese Farmer
Silver Member
Push in the clutch