Tractors and wood! Show your pics

   / Tractors and wood! Show your pics #20,181  
Looks like it's time to transition from clearing land to being a wood splitter!
958194252.jpg
 
   / Tractors and wood! Show your pics #20,184  
When I come to a block that is on the verge of being too big to transfer from the raised bucket to the splitter beam I break it down. Brings back memories of when all I had was a hammer and maul for a very long time. Like many here I am sure.

P1010587(2).JPG


gg
 
   / Tractors and wood! Show your pics #20,185  
These days I'll do about anything to avoid splitting by hand. I do keep a few wedges around, but they tend to get used as wheel chocks more than on firewood. Good on those of you who still do it.
 
   / Tractors and wood! Show your pics #20,186  
It's been a long time since I've had anything that big... most of my firewood right now comes from old harvest jobs and those big ones stay right on the landing. I still enjoy splitting with my 8 lb maul; first using my hydraulic splitter to get it to manag
When I come to a block that is on the verge of being too big to transfer from the raised bucket to the splitter beam I break it down. Brings back memories of when all I had was a hammer and maul for a very long time. Like many here I am sure.

View attachment 744174

gg
My back hurts just looking at that pile! ;)
 
   / Tractors and wood! Show your pics #20,189  
When I come to a block that is on the verge of being too big to transfer from the raised bucket to the splitter beam I break it down. Brings back memories of when all I had was a hammer and maul for a very long time. Like many here I am sure.

View attachment 744174

gg
Yup those memories and Iam glad they are memories. ;)
 
   / Tractors and wood! Show your pics #20,190  
Not really. House to the north, neighbor's property and shed to the south, yet bigger trees to the west and saltwater to the east. It was a windy day anyway and I would not have trusted jacking the trees.
We’ve jacked stuff in some pretty good winds before, with a set of jacks like I have you can see exactly what that tree is doing. If the pressure on the gauge rises you know you’re in for a treat that tree is setting back. Without being there to look at the lays available it’s hard to say if that’s what I would of done. I’ve jacked 5’ cedars hanging back over a main county road as well as done fir like what you have pictured with jacks without issues before, but you have to foresee the lay.
 

Tractor & Equipment Auctions

MULTIQUIP WHISPERWATT MQ POWER 25 GENERATOR (A52706)
MULTIQUIP...
70pc. 12ft.x 3ft. Black Metal Roof Panels (A55758)
70pc. 12ft.x 3ft...
Komatsu WA250 (A47477)
Komatsu WA250 (A47477)
2008 Ford E-250 Cargo Van (A55788)
2008 Ford E-250...
2013 Nissan Sentra Sedan (A53424)
2013 Nissan Sentra...
New 27ft Ratchet Strap (A54865)
New 27ft Ratchet...
 
Top