traveling washing machine

   / traveling washing machine #1  

K_Daulby

Member
Joined
Aug 16, 2002
Messages
45
Location
Simcoe Ontario
Tractor
BX 23s ,,BX 2200
anyone out there have any good sugestion for stoping my washing machine from traveling all over my basement
it is on concrete and is level. however when the load gets out of banlance it starts to travel. I put it back in position at least once a week if not twice. any sugestions will be appreaciated
thanx in advance
Kevin
 
   / traveling washing machine #2  
Other than tethering it, the only thing I can think of is making sure all 4 feet are adjusted so ther're tight to the floor...............chim
 
   / traveling washing machine #3  
I used rubber mounted bottom adustable legs..works fine.

Pick them up at Sears store.
 
   / traveling washing machine #4  
Make sure the suspension springs are still all in position "under the hood". I had one break and we couldn't keep the washer in place.
 
   / traveling washing machine #5  
is it a GE washer ??? if so...they have rubber straps that act as torsion stops on the bucket. they break....often.... and allow the bucket to slop around eventually messing everything up. pop the hood and see if you have them. this may be causing the strolling.
 
   / traveling washing machine #6  
I echo the above posts. Something must be broken to cause it to move so much. Mine
is in the basement & I don't ever remember having it move around. Been there for 13 yrs.
 

Tractor & Equipment Auctions

UNVERFERTH 330 8 AND 1/2 INCH EXTENSION STUB TUBE WELDMENT FOR FRAME (A53473)
UNVERFERTH 330 8...
20 ft. Shipping Container (A53117)
20 ft. Shipping...
Как зайти с телефона на кракен. kra39ac.cc  | Kraken зайти на площадку? как пополнить кошелёк? Правила диспута
Как зайти с...
2016 Chevrolet Traverse LS SUV (A53117)
2016 Chevrolet...
2019 RAM 2500 Crew Cab Pickup Truck (A53422)
2019 RAM 2500 Crew...
20X30 ALL-STEEL CARPORT W/ ENCLOSED SIDEWALLS (A53843)
20X30 ALL-STEEL...
 
Top