Truss Info

   / Truss Info #2  
Trusses and Buildings

There are also a ton of truss plans of all types and layouts for various buildings.Downloadable PDF for the most part.
I built these 24' 3/12 for about $27 each
 

Attachments

  • 632679-trusses up inside small.jpg
    632679-trusses up inside small.jpg
    32 KB · Views: 369
   / Truss Info #3  
Chucko,
How big a span do you need? One thing to consider is mobile-home trusses. I'm in FL too, and there are PLENTY of new mobile home trusses to be had cheaply. Usually they are made for one roof, and the owner changes the plans. You can screw together a pair of double wide trusses and scab 1/2" plywood gussets on both sides - to give you a 28' clear span for about $15 for each truss. I was skeptical about using these until I built a pole barn for a friend. They are very well engineered and I had my 250lb butt up on the roof and no sag - was VERY happy. We did a 24 X 28 roof for $175 (trusses, gussets & purlins). I know they are down your way too. I'm in G'ville.

49 T&C
 
   / Truss Info
  • Thread Starter
#4  
I work at Alpine. Truss Eng and Truss Eng programs is what we do. I am a software tester for them. I don't need trusses I was just trying to be help out a little
Besides I am in Florida and you would not belive the wind codes we have now. most DIY trusses are frowned on by the building department....not that say it is not done
 

Tractor & Equipment Auctions

2000 John Deere 770CH Articulated Motor Grader (A49461)
2000 John Deere...
2003 MACK RD6885S T/A DUMP TRUCK (A51406)
2003 MACK RD6885S...
2020 CASE CX37C EXCAVATOR (A51242)
2020 CASE CX37C...
CATERPILLAR 308E2 CR EXCAVATOR (A50458)
CATERPILLAR 308E2...
JLG 1255 Telehandler (A51039)
JLG 1255...
2011 L3 GENERATOR SET (A51222)
2011 L3 GENERATOR...
 
Top