TSC Carry All, BX2200

[JimC]

And the top of the carry all attaches to the trailer hitch socket I attached to the back of the FEL
I discribed the trailer hitch in a previous port under atachments a few months ago.
see photo

 

[JimC]

A better view of where the chain to hold the bottom of the carry all attaches
JimC

 

[JimC]

There are two plates added to the carry all that fit above and below the FEL lip.

JimC

 

[Anonymous Poster]

JimC... Thanks for all of those photos. I can see exactly how you attached the carry all.

John

 

[Anonymous Poster]

I have the carry-all from TSC for use with my BX-22. Price was right and it' works well. My platform is about 40" wide.

 

[Anonymous Poster]

jbecker... thanks, I plan to make mine about the same size with removable sides about 18 inches high.

John

 

[kyoders]

I have the TSC carry-all on my BX2200. I've just been using a pallet on mine as a platform (the one my tiller came on). Works for what I use it for, mostly hauling bags of "stuff" around, like compost, etc. I've had as many as 16 bags on it at once, with nominal weight 40lbs/bag, 640 lbs. Also had 9 bags in the FEL for counterweight. I've been thinking about putting a back on it to make it easier to stack the bags to the front.

Kevin

 

[Anonymous Poster]

I'm planning on the removable sides, too. I just need the time (yea, right...<G>) and a trip to TSC to get some stake pockets. Maybe by next spring...

 

[Anonymous Poster]

I will put 4 sides on mine. I better be careful with the type and thickness of material I choose. If I'm not careful the weight of the carry all will exceed the lift capacity of my BX2200! I may use treated 2X8s for the floor and treated 4 quarter for the sides (1 inch). Not sure how I will attach the stake pockets. I also want to make a dolly that I can set it on when I am not using it (2X4s and 4 casters).

John

 

[gws]

I just toss a pallet on mine. I have a piece of plywood I can lay over the pallet if I need a "no hole" service to lay somthing on.