Turnbuckle Play

[kentrodngun]

John, thanks for your input but unfortunately, even with the turnbuckles fully cranked down (threaded sections fully enclosed in the body) I still have too much play. I'll experiment with some of the suggestions offered and see if I have any luck. I'll keep you all posted post deer season (gotta have some priorities in life). Happy Thanksgiving to all.

 

[JerryG]

John,
There is something wrong. Either the implement is to narrow or the sway links are mounted wrong. Measure between the swivel balls with the links tightened all the way. Do this while holding the arms as close together as possible. The measurement should be somewhere around 26" give or take an inch.

 

[kentrodngun]

Let's close this one down guys. I bought shorter stay chains (through E-Bay for about $40 incl shipping) and it solved the problem. I had to move the set up to the next hole due to the shorter length, but it works like a charm. Since I got the machine well used, perhaps someone substituted turnbuckles that were too long? I'll never know but now don't care and trust I won't miss the sound of the loop rings biting the tires. Again, thanks to everyone for their advice and comments.

 

[mathey]

Can you provide a link to the chains you bought on EBay?

 

[kentrodngun]

Sure - here it is: Just copy and paste in your address window.
The fellow also has other tractor parts and ships them quickly for a flat fee of $8.95. Check often as he only lists a few items and doesn't replace them immediately after selling.

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=7563242868&rd=1&sspagename=STRK%3AMEAFB%3AIT&rd=1