Tx1300 injector nozzle

   / Tx1300 injector nozzle #1  

marcelPL

Silver Member
Joined
Dec 18, 2018
Messages
249
Location
Poland
Tractor
iseki TX1500 and TX1300F
It looks like one of my injectors on tx1300 gave up.

From what I found, all I can buy is a separate injector nozzle. But it looks like it's only a small part of the injector.

Is there a way to separate the nozzle from the injector? To me this looks like one solid piece of steel...

I can find something here:

Any help is appreciated
IMG_20221203_143405_1.jpg
 
   / Tx1300 injector nozzle #3  
Hold the top of the injector in a vise, watch the threads.
Now use the flats on the injector to loosen it..(3/4”.?)
Tighten it back to 50-55 ftlbs w a new nozzle..
 
   / Tx1300 injector nozzle #4  
Go ahead and take it apart & get the number off the nozzle..& look it up on Google-Who..
 
   / Tx1300 injector nozzle #5  
Hi Marcel, I bit late with my reply, good to see your still using your tractors

DSC02642 by chrismac2012, on Flickr

I pulled mine apart and got the nozzles replaced, they need set up with shims to pop at the correct pressure, I dont think they guy who did mine made a very good job of setting mine. The part number I had was Injector DN4SD24

All the best.
Chris
 

Tractor & Equipment Auctions

91013 (A48082)
91013 (A48082)
Xtreme XR1045 (A50120)
Xtreme XR1045 (A50120)
2015 Dodge Charger Sedan (A50324)
2015 Dodge Charger...
2013 COACHMEN CATALINA TRAVEL TRAILER (A52472)
2013 COACHMEN...
2011 PETERBILT 337 (A52472)
2011 PETERBILT 337...
2016 Ford Fusion Sedan (A50324)
2016 Ford Fusion...
 
Top