TYM loaders

[jd870]

Who makes the loaders for TYM and where are they made.?

 

[FullMetalBucket]

I would think the TYM loaders are made in South Korea like the rest of the tractor.

 

[FullMetalBucket]

不
不
在 china.

Source?

 

[CloverKnollFarms]

Everything I've read, says by TYM in A Korea

 

[jigs_n_fixtures]

I think they are made by a TYM subsidiary, in Korea. And that subsidiary makes loaders, backhoes plus 3-point parts for other Asian manufacturers besides TYM, and the tractors they make for other brands.

I stumbled across a web page in Korean, for the subsidiary, about six months back. But was too stupid to bookmark it.

 

[2515R Dude]

On my loader is writen made in s Korea as well as on Backhoe. Though they use geezers with a special thread which is used in China only

 

[Zion Kim]

They are manufactured by a Korean company called ROOT. ROOT is a wholly-owned subsidiary of TYM, with TYM holding 100% of its shares.

ROOT

LOAD THE FUTURE, ROOT에 오신것을 환영합니다.

root.tym.world

 

[ptsg]

On my loader is writen made in s Korea as well as on Backhoe. Though they use geezers with a special thread which is used in China only

By "geezers" I believe you meant grease zerks? If yes, then no they don't use a special thread. They simply use 1/8" BSPT grease fittings available all over the world.

 

[2515R Dude]

Not on mine. It was some metric thread, I don't remember exactly. My old melted brains.
My dealer usualy re-cut it for 1/8bspt.
After long search I was able to find only one supplier in thr US and ordered a bunch. When researching this was the info I had from wiki.

 

[jigs_n_fixtures]

Not on mine. It was some metric thread, I don't remember exactly. My old melted brains.
My dealer usualy re-cut it for 1/8bspt.
After long search I was able to find only one supplier in thr US and ordered a bunch. When researching this was the info I had from wiki.

I bought a couple of kits of zerks fittings at the Murdochs, a regional farm and ranch supply store. One is metric and the other is SAE. Haven't found any fittings thus far that I couldn't replace from one or the other kit.