TYM service manuals/parts catalogs on-line (pdf) here ...

horsebroke · Jun 27, 2009

I tried sending the files to Robertk - but the transmission failed for the Service Manual. File's WAY TOO LARGE - for either his email - or mine, but either way, it didn't work. Anyone know how to POST the files here??

I attempted to attach the file here - but it's too large.

jpav · Jun 28, 2009

Email is not meant for sending files, so what you are seeing is normal.

File Transfer Protocol (FTP) is what you'll want to use. I can set up some space if you want to send it to my server. Let me know.

Josh

horsebroke · Jul 16, 2009

Thanks, Josh. I can use FTP - but need your address. Can you send via private email to me 'hansford@us.ibm.com".

thx

jpav · Jul 17, 2009

Vic was good enough to post the files for the T450 guys that want them. You can access them by visiting:

Index of /t450

Looks like Bob and Greg were wanting the files. If they don't see this post, and someone wants to let them know.

robertk · Jul 17, 2009

Hi Josh, thanks for posting the files, but when I try to down load the files a window pops up and says they are damaged. It may be my computer though. Any help would be appreciated

Thanks, bob

robertk · Jul 17, 2009

well I tried another computer to down load the files and it appears to have down loaded them but to where I don't know.

Bob

jpav · Jul 17, 2009

Not a problem on your end. The files do appear damaged/incomplete. Not sure what the exact cause of it is, but I'll send a note to Vic, and see if he can reupload them to the server. I'm guessing it is an issue with what he is using to FTP the files. Will post back here when I have downloaded them and confirm they are good files.

horsebroke · Jul 17, 2009

I have no idea why the files would be corrupted. I used FTP, and mput all 4 of the .pdf files.

Anyway, I just completed putting them again.

good luck

jpav · Jul 18, 2009

Ya gotta set it to binary mode. See:

With FTP from DOS, how do I transfer files? - Knowledge Base

horsebroke · Jul 22, 2009

OK - I uploaded again, setting to BINARY first. Again, they seemed to upload OK. Give it a try.

jpav · Jul 23, 2009

Yup. Now they work fine.

Jerry/MT · Jul 23, 2009

Slippy said:
Anyone know where I can find the service manual for the 903?

Slippy,
Hw is your 903 doing? Are you working the snot out of it? How many hours so far?

Jerry/MT · Jul 23, 2009

Slippy said:
Anyone know where I can find the service manual for the 903?

Slippy,
How is your 903 doing? Are you working the snot out of it? How many hours so far?

brianMO · Jul 31, 2009

Begging for a t330 service manual. I did download the t450. Some of it looks the same.

thx,

Brian

myyaz33 · Jul 31, 2009

brianMO said:
Begging for a t330 service manual. I did download the t450. Some of it looks the same.

thx,

Brian

pm sent

jpav · Jul 31, 2009

It is linked back on page 2. Here is the link again.

Index of /t330

PANHAPP · Aug 18, 2009

I'd like to thank those responsable for the T450 files. They should be a lot of help with my Mahindra 4510c.

Slippy · Aug 23, 2009

Jerry:
Sorry for not getting back sooner.
It is ok. Really like the gear ranges and being in the cab, except, I have had problems with the air conditioning. As you can imagine, that was one of the reasons I went to the expense of a cab and I have been disappointed. I eventually took the tractor to a mechanic myself and he tried to fix it. It is working better, but still not like it should. Other than that, it has been fine. Sure makes bailing and mowing much easier.

darreng · Dec 19, 2009

Does anyone have an owners manual for 233? can't locate one anywhere...TYM-USA says you should be able to download from there spec sheet, but I can't get anything. Thanks