TYM T474 loader joystick buttons

[Matune]

My tractor has buttons on the loader joystick. In see they are to control a third hydraulic function. So, if I want to use those buttons to run a grapple, what do I need to activate those buttons?

I also figure I need another hydraulic source. Where and how do I plumb that in? (I using the extra outputs in the back to run a center top link)

 

[TractorTYMe]

Those buttons are plumbed in for the factory 3rd function kit from TYM

 

[Matune]

Those buttons are plumbed in for the factory 3rd function kit from TYM
View attachment 679236
View attachment 679237
View attachment 679238

Thank you. I was hoping that this was something could hook into myself. No problem though! Thanks again,

 

[TractorTYMe]

Contact your dealer to see what the kit cost? You might be able to still install it yourself? I do not have a part #.

 

[EuroYanmar]

Those buttons are plumbed in for the factory 3rd function kit from TYM
View attachment 679236
View attachment 679237
View attachment 679238

Good morning,

On your second and third pictures the factory valve on your TYM 474 does not look like the one on the TYM website.
Have a look on the features here : t474_1 | TYM Tractors
Did TYM factory make some improvements because the valve was too much exposed or is this guard from your personal design ?

Phil

 

[TractorTYMe]

The guard came with the 3rd function kit from TYM, dealer installed.

 

[EuroYanmar]

The guard came with the 3rd function kit from TYM, dealer installed.

So TYM changed its valve protection design probably because of some multiple issues reported by dealers....

This is one more proof that this company is serious.

 

[TJL442]

Mine is the same as pictured, bought July, 2020. It is a great tractor, no issues so far.

Tim

 

[TractorTYMe]

Mine is the same as pictured, bought July, 2020. It is a great tractor, no issues so far.

Tim

Nice Tim, I got my T474 delivered on July 1st too.

 

[EuroYanmar]

Mine is the same as pictured, bought July, 2020. It is a great tractor, no issues so far.

Tim

Good morning gentlemen,

Tim, this morning I was about opening a new thread but you just have closed it before its opening....
I was wondering if this interesting guard was TYMnorsky's dealer's idea or was from the factory.
Now we have the answer.

I would be greatly interested in knowing the part number of the third function kit for Tym T474 and the price for it :
1) As an option when buying the tractor.
2) As a spare part for personal mounting.

If one of you, guys, has the answers....

Phil