tym273 - Nimco control

[km-ri]

I have a Nimco control valve for my FEL with the following info:

11087-2S
K2
M07A0002

I am looking for a schematic for the control. It has 7 connections 2 go to the transmission (pump), 4 to the FEL and 1 goes to an unknown location. It is routed under the machine and I can't trace it until I lift the machine up. I also have a back hoe whic has a seperate hydraulic circuit coming off the top of the transmission which has 2 lines going to the BH control.

I would like to think the unknown fel line is a power beyond line but I woul think I would be able to see the termination point much easier. I want to add a remote circuit to handle a grapple and snow plow tilt.

I tried to get onto the Nimco-controls.com site but it appears to have a broken link.

Any thoughts?

Thanks

Keith

 

[Jeepman33]

Just curious if you ever had this answered I am wondering the same thing, I see a p2,p3 and a T3 with plugs on the valve, I was wondering if I could tap into those for a grapple remote.

Thank you,
Jason