unable to reset tire bead on 13.6x38 tire
- Thread starter Sutton
- Start date
- Views: 10340
DB Pilot
Gold Member
- Joined
- Feb 1, 2013
- Messages
- 338
- Location
- SW, New York
- Tractor
- Case Farmall 65A, L3800 Kubota, BX2200 Kubota
I see this thread is two years old but has been very helpful. :thumbsup: I have a 13.6 - 28 ag tire that has seated on the inside rim but about 2' of the outside rim will not. It is tubed. Have deflated and re-inflated several times to no avail. Cleaned the rim, sanded smooth and lubed with Bead Butter. No change in getting that portion to seat. I think my best bet is to use the tractor and wait for a really warm day. 
. Todays high was 64 F.
. Todays high was 64 F.
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
yup.. if it is tubed. pump it up and run it around the pasture.. then deflate a lil. they usually seat.
squirt some tire lube in the crack and deflate nad inflate. sometimes that alone will seat them.
squirt some tire lube in the crack and deflate nad inflate. sometimes that alone will seat them.
