Unhook the FEL on 2410

[Bird]

Yep, it's easier to take the loader off or put it on than to change 3-point implements.

Bird

 

[LGinIA]

Thanks to all for the FEL removal information. I appreciate your input and will practice this procedure on the first day of delivery. Very helpful...

 

[GlueGuy]

That sounds pretty similar to the pattern that I'm getting into with mine too. All the on/off cycles in the manual seemed excessive. I am safety minded, but the only time you really need the engine off is when you are relieving the pressure and disconnecting those hoses. Just don't get "under" the loader at any time.

The GlueGuy

 

[RAllen]

As Bird mentioned, its fairly easy to take on and off the FEL. I have done it many times.

<font color=red> BUT /w3tcompact/icons/blush.gif

You might want to check out the thread "Almost Bought the Farm". </font color=red>
When we talk about a FIRM and LEVEL spot. We are deadly serious. Easy to on the right surface. Downright dangerous on a soft and/or unlevel surface. /w3tcompact/icons/shocked.gif

I speak of personal experience.

Rick