Bird
Rest in Peace
Yep, it's easier to take the loader off or put it on than to change 3-point implements.
Bird
Bird
Unhook the FEL on 2410
- Thread starter LGinIA
- Start date
- Views: 1721
GlueGuy
Veteran Member
- Joined
- Jan 24, 2001
- Messages
- 1,654
- Tractor
- Kubota B7500
That sounds pretty similar to the pattern that I'm getting into with mine too. All the on/off cycles in the manual seemed excessive. I am safety minded, but the only time you really need the engine off is when you are relieving the pressure and disconnecting those hoses. Just don't get "under" the loader at any time.
The GlueGuy
The GlueGuy
RAllen
Silver Member
As Bird mentioned, its fairly easy to take on and off the FEL. I have done it many times.
<font color=red> BUT /w3tcompact/icons/blush.gif
You might want to check out the thread "Almost Bought the Farm". </font color=red>
When we talk about a FIRM and LEVEL spot. We are deadly serious. Easy to on the right surface. Downright dangerous on a soft and/or unlevel surface. /w3tcompact/icons/shocked.gif
I speak of personal experience.
Rick
<font color=red> BUT /w3tcompact/icons/blush.gif
You might want to check out the thread "Almost Bought the Farm". </font color=red>
When we talk about a FIRM and LEVEL spot. We are deadly serious. Easy to on the right surface. Downright dangerous on a soft and/or unlevel surface. /w3tcompact/icons/shocked.gif
I speak of personal experience.
Rick
