Using Slime

   / Using Slime #1  

MuncyBob

Platinum Member
Joined
Mar 17, 2004
Messages
884
Location
N Central PA
Tractor
PT 422
I have one wheel that has a slow air leak and have it looked at by 2 tire shops...nobody can seem to stop the leak, requires air into the tire about every 4 days or so. I was thinking about trying the Slime product but a friend said he thought the cold temps of zero or less that we sometimes get here would cause this stuff to harden and crack......anybody in cold temp areas have any experience with this or can suggest another solution? /forums/images/graemlins/confused.gif
 
   / Using Slime
  • Thread Starter
#2  
I have one wheel that has a slow air leak and have it looked at by 2 tire shops...nobody can seem to stop the leak, requires air into the tire about every 4 days or so. I was thinking about trying the Slime product but a friend said he thought the cold temps of zero or less that we sometimes get here would cause this stuff to harden and crack......anybody in cold temp areas have any experience with this or can suggest another solution? /forums/images/graemlins/confused.gif
 
   / Using Slime #5  
I have it in every tire on my lawn tractors and the two fronts on my tractor. The stuff works great and no more flats. It gets below zero in Kansas during the winter and I haven't had any problems at all. Hope this helps.
 
   / Using Slime #6  
I have it in every tire on my lawn tractors and the two fronts on my tractor. The stuff works great and no more flats. It gets below zero in Kansas during the winter and I haven't had any problems at all. Hope this helps.
 
   / Using Slime #7  
Slime is great stuff depending on where the leak is. If it's in the tread, no problem it'll get it. Sidewall, you'll have to put the tire on it's side for a little while to guarantee the Slime gets to the hole. Same with a bead leak.

Just don't look to be too popular with your tire guy when it comes time to replace the tire or you get a hole too big for the Slime to plug.
 
   / Using Slime #8  
Slime is great stuff depending on where the leak is. If it's in the tread, no problem it'll get it. Sidewall, you'll have to put the tire on it's side for a little while to guarantee the Slime gets to the hole. Same with a bead leak.

Just don't look to be too popular with your tire guy when it comes time to replace the tire or you get a hole too big for the Slime to plug.
 
   / Using Slime
  • Thread Starter
#9  
I was going to have the tire guys tube it, but they said they can't due to 2 valve stems?
 
   / Using Slime
  • Thread Starter
#10  
I was going to have the tire guys tube it, but they said they can't due to 2 valve stems?
 

Tractor & Equipment Auctions

2005 Superior Trailers VT130 T/A Vacuum Trailer (A51692)
2005 Superior...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2006 Isuzu NPR 16FT Box Truck (A50323)
2006 Isuzu NPR...
2007 BMW 750Li (A50324)
2007 BMW 750Li...
(INOP) 2018 CATERPILLAR 299D2 XHP SKID STEER (A51242)
(INOP) 2018...
2016 Nissan Murano SL AWD SUV (A50324)
2016 Nissan Murano...
 
Top