Using Slime

   / Using Slime #1  

MuncyBob

Platinum Member
Joined
Mar 17, 2004
Messages
884
Location
N Central PA
Tractor
PT 422
I have one wheel that has a slow air leak and have it looked at by 2 tire shops...nobody can seem to stop the leak, requires air into the tire about every 4 days or so. I was thinking about trying the Slime product but a friend said he thought the cold temps of zero or less that we sometimes get here would cause this stuff to harden and crack......anybody in cold temp areas have any experience with this or can suggest another solution? /forums/images/graemlins/confused.gif
 
   / Using Slime
  • Thread Starter
#2  
I have one wheel that has a slow air leak and have it looked at by 2 tire shops...nobody can seem to stop the leak, requires air into the tire about every 4 days or so. I was thinking about trying the Slime product but a friend said he thought the cold temps of zero or less that we sometimes get here would cause this stuff to harden and crack......anybody in cold temp areas have any experience with this or can suggest another solution? /forums/images/graemlins/confused.gif
 
   / Using Slime #5  
I have it in every tire on my lawn tractors and the two fronts on my tractor. The stuff works great and no more flats. It gets below zero in Kansas during the winter and I haven't had any problems at all. Hope this helps.
 
   / Using Slime #6  
I have it in every tire on my lawn tractors and the two fronts on my tractor. The stuff works great and no more flats. It gets below zero in Kansas during the winter and I haven't had any problems at all. Hope this helps.
 
   / Using Slime #7  
Slime is great stuff depending on where the leak is. If it's in the tread, no problem it'll get it. Sidewall, you'll have to put the tire on it's side for a little while to guarantee the Slime gets to the hole. Same with a bead leak.

Just don't look to be too popular with your tire guy when it comes time to replace the tire or you get a hole too big for the Slime to plug.
 
   / Using Slime #8  
Slime is great stuff depending on where the leak is. If it's in the tread, no problem it'll get it. Sidewall, you'll have to put the tire on it's side for a little while to guarantee the Slime gets to the hole. Same with a bead leak.

Just don't look to be too popular with your tire guy when it comes time to replace the tire or you get a hole too big for the Slime to plug.
 
   / Using Slime
  • Thread Starter
#9  
I was going to have the tire guys tube it, but they said they can't due to 2 valve stems?
 
   / Using Slime
  • Thread Starter
#10  
I was going to have the tire guys tube it, but they said they can't due to 2 valve stems?
 

Tractor & Equipment Auctions

2017 Ford Fusion Sedan (A50324)
2017 Ford Fusion...
(4) Rolls of Barb Wire (A50515)
(4) Rolls of Barb...
2018 FORD F-550XL SERVICE TRUCK (A51406)
2018 FORD F-550XL...
Tandem Axle Silage Cart (A50774)
Tandem Axle Silage...
SNAPPER PRO S-50X ZERO TURN LAWN MOWER (A51244)
SNAPPER PRO S-50X...
2021 FORD F-150XL CREW CAB TRUCK (A51406)
2021 FORD F-150XL...
 
Top