McGraw99
Bronze Member
Truss boom in action.
V519 / TL519 Compact Telehandler
- Thread starter Xfaxman
- Start date
- Views: 108297
Truss boom in action.
OP
Xfaxman
Super Star Member
- Joined
- Feb 8, 2013
- Messages
- 12,885
- Location
- Guthrie, OK
- Tractor
- Toolcat 5610 G - Bobcat V417 - TORO+Loader
That looks very handy. :thumbsup:
mmancuso13
Silver Member
- Joined
- Jan 8, 2017
- Messages
- 208
- Location
- Sykesville, MD
- Tractor
- Bobcat Toolcat 5600, Kubota RTV-X1100C
Re: ??? V519 Compact Telehandler
Agreed
Agreed
ArmyDoc
Silver Member
No pictures in a while, so here is me drilling post-holes for a new fence...
McGraw99
Bronze Member
Very nice! I've been wanting to hook up an auger on mine. I guess everything went well? How rocky is your soil?
ArmyDoc
Silver Member
Works a heck of alot better than my old tractor based auger. Soil is rocky in parts for top 6 in, but mostly sand/clay.
laurencen
Veteran Member
- Joined
- Feb 19, 2007
- Messages
- 1,188
- Location
- saskatchewan Canada
- Tractor
- Bobcat Toolcat 5600T Kioti CK20, Cat D2 dozer, Cat 420 tractor loader, Deer 644E loader, Bobcat E32 mini and Bobcat 590 skidsteer, Toro Groundsmaster 325D
next machine I get will be one of these,
Jchonline
Elite Member
- Joined
- Feb 19, 2018
- Messages
- 2,843
- Location
- Red Feather Lakes, CO
- Tractor
- Kubota L6060, KX040-4, M7060, X1100C, M62(S)
Does anyone know if Bobcat guarantees the boom for lifetime (ie lifetime warranty). I know JCB guarantees their PowerBoom on the loaders for life. My main reservation with this type of machine for a bunch of ground engaging stuff is that it might bend. It isn't supported against the frame like a skid steer with the arms all the way down.
OP
Xfaxman
Super Star Member
- Joined
- Feb 8, 2013
- Messages
- 12,885
- Location
- Guthrie, OK
- Tractor
- Toolcat 5610 G - Bobcat V417 - TORO+Loader
I think all of the compact telehandlers are designed for ground engaging attachments. I haven't checked the Bobcat V519 boom warranty, all I know is that I have stressed the booms to the max on a V518 and V417, with no problems.
The V518 bucket is 7.5 feet wide, 1.25 cubic yard capacity:
With the boom fully extended, have lifted the rear wheels off the ground many times.
The V417 bucket is 6 feet wide, 1 cubic yard capacity:
Have also lifted the rear wheels off the ground many times on it.
.
The V518 bucket is 7.5 feet wide, 1.25 cubic yard capacity:
With the boom fully extended, have lifted the rear wheels off the ground many times.
The V417 bucket is 6 feet wide, 1 cubic yard capacity:
Have also lifted the rear wheels off the ground many times on it.
.
KenAdams
New member
Same here, have done a bunch of ground engaging tasks and haven't ever had anything go wrong. Even sideways forces on the boom don't seem to matter. You shouldn't be worried about it bending. Thing is that the powerboom is practical, but from a physics standpoint is the worst setup you can have (because it is massively offset from the center).This means the powerboom is much more likely to have these kinds of problems. There used to be a video ( from JCB) where it was shown lifting and you could see a huge amount of slant in the boom. JCB later removed that video, probably because alot of people noticed the slant and they obviously didn't want that.