OP
jmanatee2
Gold Member
Not that tall.. The top chute was off and the inlet chute were off.
It was less the 4' for sure maybe less then 44"
Chipper Wallenstein BX42s
- Thread starter jmanatee2
- Start date
- Views: 17629
Not that tall.. The top chute was off and the inlet chute were off.
It was less the 4' for sure maybe less then 44"
jake98
Veteran Member
- Joined
- Nov 10, 2007
- Messages
- 1,824
- Location
- Dingmans Ferry PA
- Tractor
- 53 Cub, 70's JD 410, Kioti 25hst
Great. Thanks.
Haywire
Veteran Member
I was talking about their expensive tillers.
Holiday Series Tillers Specs
* 2 year warranty
* Cat 0/1 3 point hitch- Ideal for mini compacts
* 540 RPM PTO w/ Slip Clutch
* 4 Blades per Flange
* #80 Chain Drive
* Toolbox & Gloves included w/each unit
* Powder Paint
* Shrink Wrapped for shipping
TractorBob1529
Silver Member
Almost got the BX42, got the BMX42 instead. Great purchase, I just wish they made a 6" chipper/mulcher.
ayelvington
Gold Member
I've run the BX42 on my BX24 for two years now and it totally rocks! I got my used from Woodward, and they were great to work with.
Wallenstein makes a terrific product, and I imagine that their tillers are worth every cent.
Wallenstein makes a terrific product, and I imagine that their tillers are worth every cent.
jake98
Veteran Member
- Joined
- Nov 10, 2007
- Messages
- 1,824
- Location
- Dingmans Ferry PA
- Tractor
- 53 Cub, 70's JD 410, Kioti 25hst
OP
jmanatee2
Gold Member
Pretty ain't it :thumbsup:
merlintractor
Bronze Member
Yeah...kinda makes you think it otta go in your livingroom instead of the garage.... : )
jake98
Veteran Member
- Joined
- Nov 10, 2007
- Messages
- 1,824
- Location
- Dingmans Ferry PA
- Tractor
- 53 Cub, 70's JD 410, Kioti 25hst
ain't that the truth. :laughing:
BATTY54
Silver Member
Two things I did to my BX42 were to add star washers under the knobs on the chute, it was constantly dropping while chipping from vibration, not a problem but the chip pile kept getting closer. The second was to add a 4x4 under the legs on each side to level the drive line a little and give it a better footprint for soft ground.
As a final accessory I made a trailer hitch that goes between the legs to pull a small wagon with all my gear, brush cutter, polesaw and chainsaw along with fuel, oil, chains,and refreshments.
As a final accessory I made a trailer hitch that goes between the legs to pull a small wagon with all my gear, brush cutter, polesaw and chainsaw along with fuel, oil, chains,and refreshments.