Water pump Question

/ Water pump Question #1  

CJBOTA

Gold Member
Joined
Aug 23, 2008
Messages
275
Location
Salem, Ohio
Tractor
Kubota B2620 & MX5100
What is the best way to pump water from a pond into a 200 or 300 gallon plastic tank. Electricity is not available. Do they make a pump that will run off a PTO? If not what are my options? thanks!
CJ
 
/ Water pump Question #2  
They do make PTO driven pumps, not sure what they cost. Do a search on google and you will find a couple of different manufacturers. When I got one to pump water for my garden I went to Tractor Supply, here's a link to thier pump.
Tractor Supply Company - Champion 5.5 HP* 3 in. Water Pump

good luck

Mark
 
/ Water pump Question
  • Thread Starter
#4  
I think about 20 to 30 minutes would be reasonable. Although, I'm sure after I started doing this 10 to 15 minutes would be alot better. 10 to 15 gpm would be ok. thanks!
CJ
 
/ Water pump Question #7  
I would use a little gas powered pump. I personally use a Tanaka that weighs about 23 pounds and works great. Honda also makes them but they are larger.

Andy
 
 

Marketplace Items

Volvo EC220EL (A60462)
Volvo EC220EL (A60462)
2024 J&M TF215-40-G Soil Finisher (A63116)
2024 J&M...
20 Yard Roll Off Dumpster (A61165)
20 Yard Roll Off...
2018 Jayco JayFlight 264BH (A62613)
2018 Jayco...
UNKNOWN 500BBL WHEELED FRAC TANK (A58214)
UNKNOWN 500BBL...
2019 Freightliner M2 106 Box Truck, VIN # 3ALACXFC8KDLH3612 (A61165)
2019 Freightliner...
 
Top