Water pump Question

/ Water pump Question #1  

CJBOTA

Gold Member
Joined
Aug 23, 2008
Messages
275
Location
Salem, Ohio
Tractor
Kubota B2620 & MX5100
What is the best way to pump water from a pond into a 200 or 300 gallon plastic tank. Electricity is not available. Do they make a pump that will run off a PTO? If not what are my options? thanks!
CJ
 
/ Water pump Question #2  
They do make PTO driven pumps, not sure what they cost. Do a search on google and you will find a couple of different manufacturers. When I got one to pump water for my garden I went to Tractor Supply, here's a link to thier pump.
Tractor Supply Company - Champion 5.5 HP* 3 in. Water Pump

good luck

Mark
 
/ Water pump Question
  • Thread Starter
#4  
I think about 20 to 30 minutes would be reasonable. Although, I'm sure after I started doing this 10 to 15 minutes would be alot better. 10 to 15 gpm would be ok. thanks!
CJ
 
/ Water pump Question #7  
I would use a little gas powered pump. I personally use a Tanaka that weighs about 23 pounds and works great. Honda also makes them but they are larger.

Andy
 
 

Marketplace Items

2006 Dodge Ram 1500 Pickup Truck (A61568)
2006 Dodge Ram...
2007 Volvo VNL Truck Tractor (A63118)
2007 Volvo VNL...
JOHN BLUE 200 GALLON NITROGEN APPLICATOR (A63290)
JOHN BLUE 200...
PALLET OF ROLLING FENDERS (A63745)
PALLET OF ROLLING...
500 BBL FRAC TANK (A58214)
500 BBL FRAC TANK...
2015 GENIE S-65 MAN LIFT (A63569)
2015 GENIE S-65...
 
Top