Water pump Question

/ Water pump Question #1  

CJBOTA

Gold Member
Joined
Aug 23, 2008
Messages
275
Location
Salem, Ohio
Tractor
Kubota B2620 & MX5100
What is the best way to pump water from a pond into a 200 or 300 gallon plastic tank. Electricity is not available. Do they make a pump that will run off a PTO? If not what are my options? thanks!
CJ
 
/ Water pump Question #2  
They do make PTO driven pumps, not sure what they cost. Do a search on google and you will find a couple of different manufacturers. When I got one to pump water for my garden I went to Tractor Supply, here's a link to thier pump.
Tractor Supply Company - Champion 5.5 HP* 3 in. Water Pump

good luck

Mark
 
/ Water pump Question
  • Thread Starter
#4  
I think about 20 to 30 minutes would be reasonable. Although, I'm sure after I started doing this 10 to 15 minutes would be alot better. 10 to 15 gpm would be ok. thanks!
CJ
 
/ Water pump Question #7  
I would use a little gas powered pump. I personally use a Tanaka that weighs about 23 pounds and works great. Honda also makes them but they are larger.

Andy
 
 

Marketplace Items

17395SFL (A61568)
17395SFL (A61568)
2013 John Deere 8360RT Track Tractor (A63109)
2013 John Deere...
2017 FORD F-450 XL BUCKET TRUCK (A58375)
2017 FORD F-450 XL...
2012 John Deere 1770NT CCS Planter (A63109)
2012 John Deere...
PALLET OF JOHN DEERE INSECTICIDE HOPPERS (A63290)
PALLET OF JOHN...
Spray King Pull Type Sprayer (A63116)
Spray King Pull...
 
Top