hazmat
Elite Member
- Joined
- Feb 12, 2002
- Messages
- 4,051
- Location
- West Newbury, MA & Harrison, ME
- Tractor
- Kubota L5460HSTC
Looks great!
Welded some hooks on my FEL
- Thread starter dkchandler
- Start date
- Views: 14072
MossRoad
Super Moderator
- Joined
- Aug 31, 2001
- Messages
- 57,928
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
I don't think that will work either..... just kidding /w3tcompact/icons/tongue.gif
sleepyhollow
Silver Member
- Joined
- Jul 8, 2001
- Messages
- 155
- Location
- Connecticut
- Tractor
- JD 4310, eHydro - R4, dual SVC, speedmatch/cruise, rear floods
dkchandler,
I bet you never imagined in your wildest dreams that a couple of $2 hooks would result in a melee, a bruhaha of 72 posts and well over 3000 views!
I also bet that's the last time you weld something on your tractor without wondering if the TBN'rs are going to read you the 11th commandment: "Thou shalt not weld unsafe devices to your tractor." /w3tcompact/icons/smile.gif
That's a lot of people that care about your safety who never even met you. That's pretty darn cool. Hope your next post is well... uneventful... All the best!
Sleepyhollow
I bet you never imagined in your wildest dreams that a couple of $2 hooks would result in a melee, a bruhaha of 72 posts and well over 3000 views!
I also bet that's the last time you weld something on your tractor without wondering if the TBN'rs are going to read you the 11th commandment: "Thou shalt not weld unsafe devices to your tractor." /w3tcompact/icons/smile.gif
That's a lot of people that care about your safety who never even met you. That's pretty darn cool. Hope your next post is well... uneventful... All the best!
Sleepyhollow
I feel like you earned a merit badge or something. Sure you're not setting us up for a one chain vs. two straps question? (Just kidding, that was referencing another great thread.)
Good job! No countin' sheep tonight.
P.S. Don't be postin' any pictures next week of that third hook bent open.
Greg
Good job! No countin' sheep tonight.
P.S. Don't be postin' any pictures next week of that third hook bent open.
Greg
mrcaptainbob
Platinum Member
I love it! Thanks for putting us at ease. Annnnnd for puitting UP! with us!!!!/w3tcompact/icons/laugh.gif
BigEddy
Gold Member
- Joined
- Sep 6, 2002
- Messages
- 268
- Location
- Eastern Ontario
- Tractor
- JD 855, 322, AMT626 plus whatever my son dragged home this month
Okay - at the risk of starting this up all over again, here's a picture of the hooks I welded on. My logic was that there is a lot more weld with these hooks than the "slip hooks" I had and the hooks are thicker than the chain I use anyway. The nice thing about these is that there is no torquing of the hook when I pull versus a grab hook which is always being torqued.
I read all the notes above - no need to repeat all the concerns.
I read all the notes above - no need to repeat all the concerns.
Attachments
MossRoad
Super Moderator
- Joined
- Aug 31, 2001
- Messages
- 57,928
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
No. /w3tcompact/icons/smile.gif
cpicton1
Silver Member
deja vu /w3tcompact/icons/wink.gif
Anonymous Poster
Epic Contributor
- Joined
- Sep 27, 2005
- Messages
- 29,678
Looks like a tire chain link to me. Here we go again !
MikePA
Super Moderator
Look like <A target="_blank" HREF=http://www.tirechains.com/images/crosschainhook2.jpg>cross chain hooks</A> for tire chains. Not a good idea to lift with. No offense, but when the right hooks are available and are not all that expensive, why use anything else?