What are your 2011 season project plans?

   / What are your 2011 season project plans?
  • Thread Starter
#61  
OK, first project done. It didn't start out that way but a funny thing happened on the way to the barn. I decided to drag my lawn with a chain harrow and rip up all the dead grass and bare spots so the lawn would have a better chance to spread out. Plus I wanted to break up all the dog doo from winter.
I bought a chain harrow a few years aog to smooth an alfalfa field and discovered it worked great on dead grass and the lawn witout excessive damage.
It's dry enough here so yesterday I hooked to my B7800 and dragged the lawn two directions to scuff it and rip up the thatch. Not sure if I did the right thing or not but it works for hayfields so here goes.

One photo shows the grass as it was before I started. You can see the dead spots. Another photo is the chain harrow.
One more of the grass ripped up and one of the enormous pile of dead grass I would up with. I had no idea it would be that much from maybe 1 1/2 acres.
Soon I'll fertilizer and I believe it will work as intended.
Project one is done.


.Photos fixed
 

Attachments

  • 002.JPG
    002.JPG
    437 KB · Views: 89
  • 026.JPG
    026.JPG
    207.4 KB · Views: 81
  • 009.JPG
    009.JPG
    349.3 KB · Views: 91
  • 005.JPG
    005.JPG
    309.2 KB · Views: 88
  • 010.JPG
    010.JPG
    314.8 KB · Views: 90
Last edited:
   / What are your 2011 season project plans? #62  
***Photos won't post for some reason--give me a minute.
I can't figure it out--I have a newer camera but it won't poat the photos. I'll check back later today.
whistle.png
 
   / What are your 2011 season project plans?
  • Thread Starter
#63  
Second project this year is a "low-buck" potato hiller and digger.
I started last fall with a toolbar from an auction and some old cultivator pieces. The blue parts are off a Ford 1970's? 8 row cultivator I bought at auction for $15. Nobody wants these things any longer.
The red toolbar is off an old Ford or Dearborn planter from the 1950's? The toolbar size is too small but you can see I spaced it out with angle iron.
What makes it work is the clamp arrangemnt on the blue Ford cultivator parts in that they will hold the shank from the discs I bought. Anyway, it works perfectly.

For the digger part I have an old Massy Ferguson cultivator shank that I fitted with a new 15" shovel. Swap out the discs for the shovel and i can dig like a mad man and not break a sweat.

One note is that I hill the dirt to some degree before I plant the potatoes and then will hill a few times during the season. I have one long row that I succession plant in so we have new potatoes all season.
Here's some photos--

.
 

Attachments

  • 018.JPG
    018.JPG
    422.8 KB · Views: 88
  • 019.JPG
    019.JPG
    287.3 KB · Views: 77
  • 021.JPG
    021.JPG
    475.8 KB · Views: 86
  • 023.JPG
    023.JPG
    265.7 KB · Views: 87
Last edited:

Tractor & Equipment Auctions

Topsoil Trommel (A57453)
Topsoil Trommel...
2012 MCLAUGLIN/VERMEER V800AWXT VACUUM EXCAVATOR (A57880)
2012...
New/Unused CFG Industrial XZ20R Mini Excavator (A57453)
New/Unused CFG...
2018 Caterpillar 972M Articulated Wheel Loader (A56857)
2018 Caterpillar...
13hp Honda 7500 Watt Generator (A57454)
13hp Honda 7500...
2013 Dodge Charger Passenger Car, VIN # 2C3CDXAT8DH646721 (A57453)
2013 Dodge Charger...
 
Top