WHAT DID YOU DO TODAY ?

[LBrown59]

Putting in a 13' by 18'' culvert for a ditch crossing to drive my tractors and pickups across.

 

[LBrown59]

Putting in a 13' by 18'' culvert for a ditch crossing to drive my tractors and pickups across.

UpDate:
Just finshed it up about 30 minutes ago.

 

[Podunkadunk]

Post some pics

 

[LBrown59]

Cleaned out 2 13 X 30 foot stalls in one of my pole buildings to see if I can park 2 foreign pickups and 4 tractors in them.

 

[weldingisfun]

Finished painting my brand new used stock trailer white. Couldn't handle the original canary yellow paint.

 

[LBrown59]

Finished painting my brand new used stock trailer white. Couldn't handle the original canary yellow paint.

Got the leak in my porch roof fixed.

 

[LBrown59]

Cleaned out 2 13 X 30 foot stalls in one of my pole buildings to see if I can park 2 foreign pickups and 4 tractors in them.

Up Date
Decided to see if i could Clean out my 4 stall garrage To get 4 pick ups and my 6 tractors in it.
Mission accomplished = a11 10 vehicle are parked in there.

 

[dbdartman]

Cut the 6 acres of field around the house. New personal best time, too: Went out at 10AM, dropped the back hoe, installed lift arms on tractor, hooked up 5' cutter, checked gear box oil level, stopped to check phone line the phone company has been working on for nearly a week (it's finally fixed, YAY, trouble was in a box 2 miles away), stopped once for a head break, & finished just after 1:30PM! I really should have swept the top of the mower deck off though, the clippings are only about 6" deep near the front...

 

[Tig]

What did I do? I put the finishing touches on three walls of my new garage. Six of my friends and neighbours are coming over in an hour to help me stand all three up in one hour.

 

[LBrown59]

Built a set of:
Handy light duty Quick slip on bucket forks in about half an hour out of 2x2s and 1x2s for my BX23 and tried them out doing some tidying up around the place.
They worked great for what I intended them for.
In fact they worked so well I just might have to try adapting a set for the blade on the BX1500.