What have you done with/to your GC Series 2300, 2400, 1700 Tractor TODAY

[LostMy65]

Added 4 hours to the meter moving more rounds and leveling out 4 12-yard dump truck loads of dirt.

 

[kenmbz]

Trench overflowed during hurricane IDA, only designed it originally to take 4"/hour.
Now is wide enough to drive my tractor in it, and making it a bit deeper too.

 

[cglaser104]

Trench overflowed during hurricane IDA, only designed it originally to take 4"/hour.
Now is wide enough to drive my tractor in it, and making it a bit deeper too.
View attachment 713234

Hopefully you don't have to make it 2 tractors wide lol

 

[seniornukect]

Only 300' to go. Running water and 50 Amp service to the barn.

 

[Dmacleo]

started tilling 12 60 foot rows for raspberries and 1/3 way through heard a chattering on woods rc4. no leaks. finished job rear plate on gearbox leaking.
dropping at dealer tomorrow for warranty repair.
they said fully covered drop it off.
luckily I don't have any tilling for at least 3 weeks.

 

[mgstevens]

This is not so much a "with" as a "for" my GC2410. I needed to move an old door crate that was housing odds and ends. With the price of lumber, I thought of dismantling it for the 2x4's but then noticed it was about the right size to house some attachments that were taking up valuable space in other storage buildings. So, by adding about $200 in materials, I stacked and protected thousands in machinery and also free up even more valuable space in the other sheds for protecting other things. This wouldn't be possible without the clamp-on pallet forks used to get the 2 lighter attachments into their shelves.

 

[Dmacleo]

This is not so much a "with" as a "for" my GC2410. I needed to move an old door crate that was housing odds and ends. With the price of lumber, I thought of dismantling it for the 2x4's but then noticed it was about the right size to house some attachments that were taking up valuable space in other storage buildings. So, by adding about $200 in materials, I stacked and protected thousands in machinery and also free up even more valuable space in the other sheds for protecting other things. This wouldn't be possible without the clamp-on pallet forks used to get the 2 lighter attachments into their shelves.

View attachment 713677View attachment 713678

nice.
now who else wants to see him lift those implements out w/o a bucket/forks ??? LOL

 

[Pixguy]

This is not so much a "with" as a "for" my GC2410. I needed to move an old door crate that was housing odds and ends. With the price of lumber, I thought of dismantling it for the 2x4's but then noticed it was about the right size to house some attachments that were taking up valuable space in other storage buildings. So, by adding about $200 in materials, I stacked and protected thousands in machinery and also free up even more valuable space in the other sheds for protecting other things. This wouldn't be possible without the clamp-on pallet forks used to get the 2 lighter attachments into their shelves.

View attachment 713677View attachment 713678

Perfect size!

 

[mgstevens]

nice.
now who else wants to see him lift those implements out w/o a bucket/forks ??? LOL

 

[GeneV]

Installed Ken's hooks and clevises.