jcummins
Veteran Member
- Joined
- Jan 14, 2007
- Messages
- 1,637
- Location
- Creal Springs, IL
- Tractor
- Kubota M7040, F3680, Mule Pro Fxt
Reworking a wood line need to the drive and unearthed thede things. What is that out of?
What is this out of?
- Thread starter jcummins
- Start date
- Views: 1486
300UGUY
Super Member
My long lost flux capacitor!
��
��
Raspy
Veteran Member
- Joined
- Dec 16, 2006
- Messages
- 1,636
- Location
- Smith Valley, Nevada
- Tractor
- NH TC29DA, F250 Tremor, Jeep Rubicon
Looks like clutch plates out of a automatic transmission.
RNeumann
Elite Member
Yep a big old machine or possibly a big logging winch- although I’ve never been inside a big logging winch so that’s a swag.
turnkey4099
Elite Member
Nah, muffler bearings that didn't get greased.
MossRoad
Super Moderator
- Joined
- Aug 31, 2001
- Messages
- 57,904
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
Looks like you found a piece of mythology...
mpham
Veteran Member
Google Image Result for http://www.tpaktopc.net/images/catcrawler/CAT_D4_STEERING_CLUTCH_DISASSEMBLY16.JPG
Looks like bulldozer wet brake parts.
Looks like bulldozer wet brake parts.
nickc
Silver Member
they look like skidder brakes or dozer brakes as previously mentioned.
BHD
Veteran Member
there some type of Wet friction plates, for either brakes, or power shift transmissions, or automatic transmission, (wet means they run in a hydraulic or transmission oil)
steels or disks of steel with teeth on them will fit between them and then a hydraulic piston will push against them putting pressure, and locking them together if enough pressure is applied, thus a clutch,
similar action is used as brakes,
the plates teeth lock in to one side, either the drum or the shaft and the steels lock in to to apposite,
and a piston when applied presses against them locking the shaft to the drum,
on an automatic transmission / power shift transmission, this is how the gear range is changed,
on brakes it locks a moving part to a stationary part, on clutches like in a dozer, it locks up the drive axles or releases them,
On some clutches there are planetary gears and they use a brake band, that stops the drumm from spinned and forces the rotary power to the out going shaft, in some transmission there is a combination of clutches that work the inside of the drum and some times the outside of the drum with a band, and depending on what clutches lock up is how the transmission shifts, or transmits power through the gears, to the drive axles,
steels or disks of steel with teeth on them will fit between them and then a hydraulic piston will push against them putting pressure, and locking them together if enough pressure is applied, thus a clutch,
similar action is used as brakes,
the plates teeth lock in to one side, either the drum or the shaft and the steels lock in to to apposite,
and a piston when applied presses against them locking the shaft to the drum,
on an automatic transmission / power shift transmission, this is how the gear range is changed,
on brakes it locks a moving part to a stationary part, on clutches like in a dozer, it locks up the drive axles or releases them,
On some clutches there are planetary gears and they use a brake band, that stops the drumm from spinned and forces the rotary power to the out going shaft, in some transmission there is a combination of clutches that work the inside of the drum and some times the outside of the drum with a band, and depending on what clutches lock up is how the transmission shifts, or transmits power through the gears, to the drive axles,
cqaigy2
Super Member
Thanks for the explanation.
