Where is the hydralic fluid level check?
- Thread starter possum_hollow
- Start date
- Views: 75517
weekend project
New member
JOEAA- I USED THE MOBILE 424 HYDRALIC FLUID IN MINE. DON'T KNOW A CROSS REFERENCE FOR THE FILTER BUT MAKE SURE TO CLEAN OUT YOUR HYDRALIC STRAINER. I CHANGED MINE AT 50 HOURS AND THE FILTER AND STRAINER WERE BOTH DIRTY.
Gaowlpoop
Bronze Member
I have a 2016, 4540. The hydrolic system on mine has 2 drains. One is located just in front of the strainer, the other one is just below the power take off shaft.
When you take out the front plug, the system does not completely drain. I think it leaves about 3 gallons of fluid in the sump. This works well if you are servicing the strainer.
The dip stick is between the seat and gear shift lever and just to the right. It is under a big, about an inch, nut. This is also the fill point.
When you take out the front plug, the system does not completely drain. I think it leaves about 3 gallons of fluid in the sump. This works well if you are servicing the strainer.
The dip stick is between the seat and gear shift lever and just to the right. It is under a big, about an inch, nut. This is also the fill point.
