I bought an old Mahindra 2810 tractor with loader at auction. It seems to have a hydraulic fluid leak, so I need to figure out a couple of things. The rear PTO is inoperable. I followed the procedure for turning it on, and the switch and dash light light up. I shift the lever to the left of the operator's seat, and turn the switch to "manual," but nothing happens. I think the tractor is low on hydraulic oil, so I added five gallons of hydraulic oil to it, but still nothing happened. Here are the questions: Where can I check the fluid level for the rear PTO? I see a white plastic plug where I added the hydraulic oil, but I see no dip stick. Where should I look for it? I am told there is a viewing glass which shows the fluid level on some models, but where do I look for it?
Where to check hydraulic oil?
- Thread starter Docwatson
- Start date
- Views: 2895
swampy6
Gold Member
- Joined
- Oct 20, 2017
- Messages
- 299
- Tractor
- Mahindra 4540 4WD
This is an older thread but I was wondering if any of these members can help.
Oil & Fuel - 2810 Hydraulic level
How do you check the hydraulic level on a 2810 model. I was told there was a sight glass on the rear end. however there is not one. I have what appears to be a rubber plug with a screw in the middle of it to tighten. I purchased this tractor new and have not removed any sight glass.
www.tractorbynet.com
Root Cause
Platinum Member
Maintenance thread for Mahindra Owner's
It is well documented here and FB that the manual provides no information even for simple tasks like normal maintenance operations or pictures. Therefore, I am starting a thread to add pictures or information for those who follow in our footsteps. I will respectfully ask that others don't...
www.tractorbynet.com
It shows a 2638 but it might be the same with pictures.
BTW, us Mahindra owners are the orange-headed stepchildren here. Hope you find this a helpful place and when you find something that could help another, please post it on the post link above.
