Where's this Grease Fitting?

   / Where's this Grease Fitting? #51  
Re: Where\'s this Grease Fitting?

I greased all that I could find on the tractor frame after just a few hours of use. I greased those on the loader and backhoe about every 10 hours or so. But, those on the tractor frame really didn't need much in the first 50 because about 30 or so of those hours were spent sitting still on the backhoe. Only a little steering, wheeling, or 3ph work going on in the break-in period.

That third zerk sure has me stumped - just worried I'm missing something here. I hope the manual is in error. Could it be unique to HST's????

Tom
 
   / Where's this Grease Fitting? #52  
Re: Where\'s this Grease Fitting?

I greased all that I could find on the tractor frame after just a few hours of use. I greased those on the loader and backhoe about every 10 hours or so. But, those on the tractor frame really didn't need much in the first 50 because about 30 or so of those hours were spent sitting still on the backhoe. Only a little steering, wheeling, or 3ph work going on in the break-in period.

That third zerk sure has me stumped - just worried I'm missing something here. I hope the manual is in error. Could it be unique to HST's????

Tom
 
   / Where's this Grease Fitting? #53  
Re: Where\'s this Grease Fitting?

Front right steering ram. Every 50 hours? Wow, I hit these ones every other day. I do a lot of steering and these joints are down low.
 
   / Where's this Grease Fitting? #54  
Re: Where\'s this Grease Fitting?

Front right steering ram. Every 50 hours? Wow, I hit these ones every other day. I do a lot of steering and these joints are down low.
 
   / Where's this Grease Fitting? #55  
Re: Where\'s this Grease Fitting?

<font color="blue"> Incidentally...the owners manual calls for greasing every 50 hours. </font>
For tractor lubrication that is correct, but the loader manual recommends lubrication every 8 hours of operation.
 
   / Where's this Grease Fitting? #56  
Re: Where\'s this Grease Fitting?

<font color="blue"> Incidentally...the owners manual calls for greasing every 50 hours. </font>
For tractor lubrication that is correct, but the loader manual recommends lubrication every 8 hours of operation.
 
   / Where's this Grease Fitting?
  • Thread Starter
#57  
Re: Where\'s this Grease Fitting?

<font color="blue"> For tractor lubrication that is correct, but the loader manual recommends lubrication every 8 hours of operation. </font>

Good find! I looked in the KL130 manual that I have...it states every 10 hours. The 4 fittings behind the bucket need greasing the most. The dirt seems to just suck the grease dry...

Don
 
   / Where's this Grease Fitting?
  • Thread Starter
#58  
Re: Where\'s this Grease Fitting?

<font color="blue"> For tractor lubrication that is correct, but the loader manual recommends lubrication every 8 hours of operation. </font>

Good find! I looked in the KL130 manual that I have...it states every 10 hours. The 4 fittings behind the bucket need greasing the most. The dirt seems to just suck the grease dry...

Don
 
   / Where's this Grease Fitting?
  • Thread Starter
#59  
Re: Where\'s this Grease Fitting?

HB, Front right steering arm is correct.

Question #5

This should be an easy one to identify the location.

Don
 

Attachments

  • 886054-DSCF0686.JPG
    886054-DSCF0686.JPG
    24.4 KB · Views: 165
   / Where's this Grease Fitting?
  • Thread Starter
#60  
Re: Where\'s this Grease Fitting?

HB, Front right steering arm is correct.

Question #5

This should be an easy one to identify the location.

Don
 

Tractor & Equipment Auctions

2012 MAXEY TRAILER MFG 100KW GENERATOR TRAILER (A50854)
2012 MAXEY TRAILER...
2006 Kobelco SK210LC Hydraulic Excavator (A49461)
2006 Kobelco...
2021 John Deere 5045E  Only 86 Hours, Loader Ready, 2WD, Canopy (A51039)
2021 John Deere...
2012 STEPHENS 220BBL CRUDE OIL TRAILER (A50854)
2012 STEPHENS...
2020 MACK PINNACLE (A50854)
2020 MACK PINNACLE...
CFG MH12RX Mini Excavator (A49461)
CFG MH12RX Mini...
 
Top