LD1
Epic Contributor
The 545 is the purple stuff I was refering to in my post. I perfer the PTFE paste. It always seems that the 545 sets up like a thread locker as well as a sealer, and makes removal a bit more difficult. But it does work well.
Which type of sealant for hydraulic connection?
- Thread starter sevilla
- Start date
- Views: 21845
The 545 is the purple stuff I was refering to in my post. I perfer the PTFE paste. It always seems that the 545 sets up like a thread locker as well as a sealer, and makes removal a bit more difficult. But it does work well.
Wayne_H
Gold Member
- Joined
- Dec 16, 2004
- Messages
- 380
- Location
- Davidsonville, Maryland
- Tractor
- John Deere 4400, '48 B and 318
The 545 does set up and make taking apart harder. My goal is not to remove them once assembled, or if I needed to I'd use a different fitting.
Wayne
Wayne
radman1
Elite Member
- Joined
- Jul 8, 2006
- Messages
- 3,017
- Location
- midwest
- Tractor
- JD 4520, Toolcat 5610, Bobcat S300, Case-IH 125 Pro, Case-IH 245, IH 1086, IH 806
Whenever I have used PTFE paste, it will leak if I don't let the paste dry overnight before I use the hydraulics. If I use the paste and immediately use the hydraulics, it always seems to leak slightly and will never stop leaking.
I use teflon tape.
I leave the starting few threads devoid of tape. It allows me to use the hydraulics immediately. Been using the tape for nearly 20 years.