Who sells quick attach brackets?

ishiboo · Feb 21, 2015

I'm wondering who other than Titan sells quick attach brackets? I've been looking at a bunch of factory setups, and most seem to have more weldable area around the pins than the Titan... so I'm wondering if there any other products which have a bit more "room" to them.

This is what I need:

In addition, apparently Titan does not sell parts so if anything goes wrong or needs replacement, you have to buy a whole new set to get it.

mnr60 · Feb 21, 2015

I bought from...

river valley machine
Dubuque, Iowa

haven't installed yet

hazmat · Feb 21, 2015

ATI sells adapters for many loaders

Tach-All Quick Attach, Loader Attachments, ATI Corporation

mikefromnh · Feb 22, 2015

You could always make your own. Here's a couple homemade examples made with basic tools

http://www.tractorbynet.com/forums/build-yourself/141029-tractor-side-ss-quick-attach.html
http://www.tractorbynet.com/forums/build-yourself/170638-my-attempt-ssqa-kubota.html

Xfaxman · Feb 22, 2015

ishiboo said:
I'm wondering who other than Titan sells quick attach brackets? I've been looking at a bunch of factory setups, and most seem to have more weldable area around the pins than the Titan... so I'm wondering if there any other products which have a bit more "room" to them.
------------

Is it for your tractor or something else, like to use on the 3 point hitch?

Quick Attach adapters

Also there are a lot of them on eBay.

ishiboo · Feb 22, 2015

Thanks guys. This is for my tractor's loader.

I know there are plenty of places that make the whole thing, I just need those ends that Titan sells or Xfaxman posted a picture of... I'll be building the rest of it. I've really only seen the Titan ones on eBay.

I'll try Washburn Company tomorrow.

ishiboo · Feb 22, 2015

Found a nice bucket with only about 30 hours use for $270, so this project was jump-started

It's a 66", versus the 60" I have... but I think the 60" was a bit small for a 40hp tractor with 1200lb loader, and this bucket is not quite as deep, so I think it should be perfect! I did NOT want to cut the ears off my bucket, and it was not in great shape anyway.