RobMA
Member
Just finished my BX-23's light bar. Its got two forward facing 55w trapezoid floods (WalMart - $19.95), one rear facing 55w flood (Benny's - $9.95), and four amber alternating flashers (eBay - postal vehicle lights - a box of 10 for $25). All of this is bolted to a piece of angle iron u-bolted to the ROPS.
I have it wired off the original switches in the dash so that the headlight switch kicks in a relay that turns on the floods. The hazard switch kicks in a relay that activates an alternating thermal flasher that flashes the ambers on the bar. All lights on total about 16 amps.
I'll have photos of the installation later on but right now... here are the movies!:
Lights - Front
Lights - Back
- Rob (having waaaaay too much fun with this tractor!)
I have it wired off the original switches in the dash so that the headlight switch kicks in a relay that turns on the floods. The hazard switch kicks in a relay that activates an alternating thermal flasher that flashes the ambers on the bar. All lights on total about 16 amps.
I'll have photos of the installation later on but right now... here are the movies!:
Lights - Front
Lights - Back
- Rob (having waaaaay too much fun with this tractor!)