why...

   / why... #11  
No it would not hurt anything to change the fluid yourself. It would take about 1 hour or about 4 beers! Hardest part is getting to old cheap ford cover off with the RTV seal they use .

Yes the magtec cover has a fill plug and dipstick. They are trighened and have o-rings. Again, very nice cover.

I would have to look at both fluids. What gear fluid are or do you want to use.
 
   / why... #12  
Ford would never disclose their shear specs- at least on purpose
I didn't know that some posis were factory mis assembled thats good info!!
So it leads me to believe the oil wasn't the culprit of shudder in my case /forums/images/graemlins/shocked.gif
 
   / why... #13  
It's funny you guys call it Panther P_ss---I was going to use that term but thought everyone would think I'd (further) gone WHACKY! LOL /forums/images/graemlins/shocked.gif
 
   / why...
  • Thread Starter
#14  
The Amsoil I wanted to use is the Sever Gear 75W90
Synthetic extreme pressure lubricant.
 
   / why... #15  
that is better then their old Series 2000! /forums/images/graemlins/mad.gif /forums/images/graemlins/grin.gif
 
   / why... #16  
I would not say it is the bet out there. Plus I know when I changed mine the color was not clear, clean or anything I have seen before.
 

Tractor & Equipment Auctions

2006 Ford F-350 Forestry Dump Truck (A51692)
2006 Ford F-350...
40ft Sea Container (A52384)
40ft Sea Container...
2000 TRAILKING TK110HDG-513 LOWBOY TRAILER (A50459)
2000 TRAILKING...
2025 IR IRE20 Mini Excavator (A52377)
2025 IR IRE20 Mini...
Toro Workman Low Profile Spray system 200 (A50322)
Toro Workman Low...
378811 (A51573)
378811 (A51573)
 
Top