Wood Splitter/ Spool Valve set up questions w/ pics

[kootenai]

I have a L3400 Kubota. I used to use my wood splitter with a Ford 3000. I ran it off the FEL spool valve. I have converted the quick connects to fit my Kub FEL spool valve but am uncertain of the configuration. In the past I have had to hold the valve open with a bungee and will have to do that again with this configuration. Where does my inlet and outlet hose hook to the spool valve?

 

[Tx Jim]

You need to attach LS hoses the the fittings on FEL valve that are mates for the same spool. I would utilize the bucket control spool.

 

[kootenai]

Thanks TX, I will ask you to be more specific. For instance, do I put the inlet to the LS on the top left or top right or bottom left or bottom right of the spool..... Dumb it down if you would.

 

[David_Kb7uns]

Left or right only top or bottom only are two different spools.

David Kb7uns

 

[Tx Jim]

I agree with David

 

[kootenai]

Thanks guys