Woods Rd7200

   / Woods Rd7200 #1  

Twanger

Bronze Member
Joined
Mar 22, 2002
Messages
91
Location
KCMO
Tractor
4310 4wd ehydro 420 loader asof 4/2/02
I can't decide how to use my 6ft rear discharge mower, with the top link attached, or allow the deck to completely float with the top link unattached. My problem is when I go over a crest of a hill, or down a valley my top link is either to short for the crest allowing the back wheels to come off the ground, or it is too long not allowing the back wheels to come up high enough to articulate a valley. Does anyone else just use their top link for transport?
 
   / Woods Rd7200 #2  
Around the property here I just drag it on its own wheels. I have the top link set so it engages the top floating linkage. with the linkage forward at a 45 degree angle. If I am going to transport it down the road, or load it on the trailer. I tighten the top link so the floating linkage is tight, and I can pick it up.
 
   / Woods Rd7200 #3  
It works, I've done it, but don't like the inability to pick up the deck for whatever reason. Others have replaced (temporatrily while mowing, I guess) the top link with a length of chain so that they still can pick up the deck if needed, but that the chain allows more flex.
 
   / Woods Rd7200
  • Thread Starter
#4  
The chain trick could be interesting, but going over a crest of a mound it wouldn't allow the rear wheels follow the ground. Thanks for the replies guys.
 
 

Tractor & Equipment Auctions

2013 John Deere 4730 Self-Propelled Sprayer (A51039)
2013 John Deere...
Ezflow 500 Gravity Box W/Cart (A50774)
Ezflow 500 Gravity...
2015 Ford Explorer AWD SUV (A50324)
2015 Ford Explorer...
2006 GMC C7500 DUMP TRUCK (A51406)
2006 GMC C7500...
2007 Amkus Rescue System (A50322)
2007 Amkus Rescue...
UNUSED FUTURE MINI EXCAVATOR HYD WOOD DRILL (A51244)
UNUSED FUTURE MINI...
 
Top