Working rail roads and their tracks.

[ArlyA]

I am wondering what the loud bang was a few seconds before the derailment started at about 11 seconds in the first video. It was about as loud as two cars slamming together. Failure of something? Speculation since we are unlikely to see the RR incident report

When the brakes hoses get released for whatever reason, then the entire trains brakes would then be "dynamited" which throws them on 100%. This is a safety feature of trains. Even if that didn't happen, the cars derailing in the front would slow, compressing the train and we'd hear the smacking of couplers. Wind rarely blows trains off the tracks. I'm not a modeler but I'd guess its 150% different than real ones.

 

[Hay Dude]

hahahaha yeah he does! Wonder if he even noticed it?

Hahahahahahaha
It’s not everyday a train crashes 200’ away and you just ignore it!

 

[5030]

The skid had an enclosed cab and he probably had the stereo on and the heater blower too. I bet he never heard it and if he did, what could he do anyway except get on his radio and call the boss.

 

[5030]

When the brakes hoses get released for whatever reason, then the entire trains brakes would then be "dynamited" which throws them on 100%. This is a safety feature of trains. Even if that didn't happen, the cars derailing in the front would slow, compressing the train and we'd hear the smacking of couplers. Wind rarely blows trains off the tracks. I'm not a modeler but I'd guess its 150% different than real ones.

If you listen, there was some noise just before they derailed. Seems as though that particular spot / area has it's share of derailments.

 

[MossRoad]

At 50 seconds you can hear the skid steer hydraulics near the camera. Then he just drives down there, does his drifty turn right towards the wreck and doesn't even notice it. Still amazing.

 

[Hay Dude]

At 50 seconds you can hear the skid steer hydraulics near the camera. Then he just drives down there, does his drifty turn right towards the wreck and doesn't even notice it. Still amazing.

Hahahahahahahahahaha
100’ Rail cars piled up like a pile of sticks…..

 

[Cub 7274]

The bang before the derailment sounded to me like a bad cushion drawbar collapsing instead of working as it should and it caused a good amount of slack "run in" maybe the engineman used the independent brake. But empty bulkheads can't absorb slack action when being pushed by shorter loaded cars into loads ahead of them especially on a curve. The same thing happened at Altoona on the Horseshoe curve which was also caught by the camera's

 

[ArlyA]

How in 1886, RR gauge width in the States was changed and became standardized.

 

[RoyJackson]

How in 1886, RR gauge width in the States was changed and became standardized.

The History Guy is a great YouTube channel. He's got a lot of very interesting videos many of you should enjoy or, at least, find interesting (like the one ArlyA linked to)

 

[buckeyefarmer]

Very interesting.