Workmaster 75 on the way.

WM75Guy · Sep 26, 2019

Signed the papers for a new Workmaster 75 with cab. Should have everything end of next week. Added R4s instead of R1s, third function and wheel weights. Wanted a third remote but they are not available yet. Also in the package is a WR Long heavy duty grapple and a WR Long 10 bale hay grapple. Traded in the Boomer 8N. Will post the required pictures when it makes it home.

dbaer78 · Sep 26, 2019

Awesome! That'll make a great tractor. I may price one similar myself... looking to upgrade in the somewhat near future. I've loved my kubota but I've looked over the new workmaster series and they're set up well for what I do.

Walter L · Oct 2, 2019

Wonder who makes the workmaster 75 for New Holland i know LS makes some of the smaller tractors for them?

WM75Guy · Oct 2, 2019

Walter L said:
Wonder who makes the workmaster 75 for New Holland i know LS makes some of the smaller tractors for them?

It is made by CNH in Istanbul, Turkey.

ovrszd · Oct 2, 2019

Congrats on the new tractor. Looking forward to pics and useage reports!!!

Now you're gonna hafta change your Avatar.

WM75Guy · Oct 2, 2019

ovrszd said:
Congrats on the new tractor. Looking forward to pics and useage reports!!!

Now you're gonna hafta change your Avatar.

I will have to do that. Tractor was getting third function installed today. Should be delivered Friday morning.

Walter L · Oct 28, 2019

Thanks Repowell (Randy) for info.

EddieWalker · Oct 29, 2019

Congratulations. My long term dream is to have a tractor with AC!!! That's going to make life so much nicer. What size mower will you use or will you use it for bush hogging?

WM75Guy · Oct 29, 2019

I put the 6' Bush Hog on it for now. I would like to get a 12' batwing down the road.

goeduck · Oct 29, 2019

Congratulations! Pictures when you can please! It did not happen unless you have pictures

oosik · Oct 30, 2019

That's a great sized tractor. This is the time of year a cab with heat might be nice for me. When I get all my Eddie Bauer down on - I look like the Pillsbury Dough Boy in tan - :cool2: :laughing:

WM75Guy · Oct 30, 2019

Here is the tractor and both grapples. Raining today so no moving hay. Will go get 100 square bales on Friday to put in the barn.

EddieWalker · Oct 30, 2019

Very nice!!! What do they use to connect the hoses and how easy are they to use after running the tractor for awhile?

WM75Guy · Oct 30, 2019

They are the flat face couplings like these. When the dealer disconnected the brush grapple they didn't bleed the pressure off so I had to break a connection and bleed off the pressure to hook it up. Once that happened they slid together easily. I plan on turning off the tractor and bleeding pressure before breaking the connections.

The NH third function has an well protected electric diverter valve mounted on the crossbar at the end of the FEL. You can see it and the couplings in the picture above. It splits the hoses used to curl the bucket so the third function hoses are very short, just enough to come out of the valve body and turn 90 degrees to the bracket holding the couplings. There is a button on the front of the joystick to use the third function. Push it and left/right on the joystick opens/closes the grapples.