Camoconcepts17
New member
- Joined
- Jul 5, 2022
- Messages
- 4
- Tractor
- LS XR4046 HC
Looking for an diagnostic adapter for the XR 4046 HC.....it is rectangular and a scan tool with an OBDII will not plug in.....any one have any direction that i can look?
Here's the adapterLooking for an diagnostic adapter for the XR 4046 HC.....it is rectangular and a scan tool with an OBDII will not plug in.....any one have any direction that i can look?
This is a slightly simpler tool than the Nexas that I own. This link shows that they have the unit for a 4046 in the draw down bar but when I called them a couple weeks ago to ask about the connection issue they confirmed that they do not actually have one for the 4046.check this one, Finally.... LS scan tool!
Is that port you pictured located under the dash on the right side?Thanks for the quick reply's.......I have a Nexlink diesel scan tool with almost every adapter that there is, except the one in this pic.....apparently the 4046 has a unique port, see pic attached. Pic is at an odd angle but it is a rectangle and not a trapezoid shape. It looks to be an 8 pin?
Yes it is....I took this pic from a different post but my tractor is the same.Is that port you pictured located under the dash on the right side?
I have the same issue. Let me know if you figure it out. ThanksYes it is....I took this pic from a different post but my tractor is the same.
I tried to order the LS scan tool but my order was cancelled due to a problem with the tractor's diagnostic connector not being able to connect to scan tool. My connector is the same as yours.Yes it is....I took this pic from a different post but my tractor is the same.