yanmar charging

   / yanmar charging #1  

u122423

New member
Joined
Sep 21, 2013
Messages
20
Location
ohio
Tractor
Kioti
I have a takeuchi mini excavator with a Yanmar (3TNA72E) motor. It currently has a generator with a regulator, I would like to switch to a 1 wire alt. has anyone done this? If so what alt. did you use? any help would be great.




Thanks
 
   / yanmar charging #2  
Not much help here but curious. I am thinking maybe you have a dynamo and a rectifier that converts to dc voltage. I converted my old Yanmar tractor from a dynamo to an alternator. Very hard to find room for it even though I used a very small alternator. This one. denso mini alternator 8162 | eBay
 
   / yanmar charging #3  
I used the same alternator on both my fx-28's. they fit perfect only mode was a 1/2" spacer on the top mount. Works great.
 
   / yanmar charging
  • Thread Starter
#4  
Thanks for the info, I bought one yesterday at a local alt. shop and I,m pretty sure that's the one I bought, the denso mini. Its going to be nice to get rid of alot of my cobbled up wiring. Now to get the rear cover off to get at the engine! Thanks again.
 

Tractor & Equipment Auctions

RIPPER ATTACHMENT FOR MINI EXCAVATOR (A58214)
RIPPER ATTACHMENT...
2021 CTS HRD 37LW 34 Ton T/A End Dump Trailer (A55973)
2021 CTS HRD 37LW...
2014 RAM 2500 (A58214)
2014 RAM 2500 (A58214)
TCM FD30T6T 5,600lb Forklift (A55973)
TCM FD30T6T...
BOMAG BW213 SMOOTH DRUM ROLLER (A58214)
BOMAG BW213 SMOOTH...
2021 Unverferth 432 Rigid 4 Row 36-inch 3PT Ripper Bedder (A56436)
2021 Unverferth...
 
Top