YM146 new owner, new to forums

[cojones]

I got the deck attached. The belt routing looks simple now that it's attached.
I think the front mount got bent up a bit in the years. I really had to abuse it to get it on.

Looks like I'm missing the adjustment handle and special nut according to this diagram I found
http://ymowners.com/phpbb/download/file.php?id=731

Anyone able to describe what that should do? Thoughts on replacing it? Right now that pulley runs free.

 

[winston1]

Does the handle adjust the adjustable pulley up and down?

 

[Neat 1500]

Mine doesn't have any of that handle bizzo either. If you need some photos I have a YM14 which is the euro version of yours.

 

[cojones]

Mine doesn't have any of that handle bizzo either. If you need some photos I have a YM14 which is the euro version of yours.

If you can show me the two pulleys up front, and how they are secured, that would be great!

 

[Barry 1]

That is the belt tensioner.That's how you tighten your belt up.The only one that Might have the parts is- Jamieson's Tractor (570)253-4810 in Pennsylvania

 

[Gjamtrac]

That is the belt tensioner.That's how you tighten your belt up.The only one that Might have the parts is- Jamieson's Tractor (502)253-4810 in Pennsylvania

Thanks for the recommendation Barry1. Please note my area code is 570-
Yes, I have the adjustment handles and special nuts.
I can have manuals printed or I will photocopy my manuals for you.
I have sent a P.M. for you to contact me.

 

[Barry 1]

Here are some pictures of the one on my YM186D-should be similar?

 

[Neat 1500]

That's it.

 

[Neat 1500]

Thanks for the recommendation Barry1. Please note my area code is 570-
Yes, I have the adjustment handles and special nuts.
I can have manuals printed or I will photocopy my manuals for you.
I have sent a P.M. for you to contact me.

I'll second that, Gary has many spares and knowledge of this series. Helped me out with mine.

 

[cojones]

My mount looks a bit different but I see where that tensioner should be attached.