YM2002D closest US model?

RJB · Apr 21, 2004

Anyone know the closest US model to a YM2002D Yanmar /forums/images/graemlins/confused.gif
Thanks Rick

Marv · Apr 21, 2004

The closest US models I found would be a John-Deere 850 & 950 some of the parts will work. If you are looking for some parts I have a YM2202 tractor that I am parting out & I have some YM2020 moter parts to if intrested.

RJB · Apr 22, 2004

Thanks for the reply. I didn't make myself clear. What I was asking. was there a US marketed Yanmar that was a close match.
Thanks Rick

Soundguy · Apr 22, 2004

240?

I had a 1700.. and it was similar in size/frame to the 2000

The manuals I got were for a ym195/240 ( smae manual.. )

A dealer will know..

Soundguy

California · Apr 23, 2004

The YM240 described in my sig pictures is the US version of YM2000. Take a look at the YM240 dealer brochure there.

If yours looks to be a later version of the same tractor then you might want the YM240 manual set available on CD. I got mine from ebay.

DavesTractor · Apr 23, 2004

The YM2002D is newer than the YM2000/240. It is three cylinder, wet brakes, spin-on hydraulic filter, full dash, etc. The USA YM220 was smaller and has dry brakes, the YM276D was larger and is a power-shift. I can't off the top of my head come up with a USA "sister" tractor to your YM2002D. It shares a good deal of parts with the Japanese YM1802D if that helps any.

RJB · Apr 23, 2004

Dave, does the xx6 designate powershift? If so I guess the YM226D would not be a close match /forums/images/graemlins/confused.gif Thanks for all the replies. Still searching /forums/images/graemlins/tongue.gif
Thanks Rick

DavesTractor · Apr 23, 2004

</font><font color="blue" class="small">( Dave, does the xx6 designate powershift? )</font>
Yes it does.

The YM2002D is neat because it is the most powerful of the smaller frame sizes in the 3-cylinder YM's. It is a workhorse.

bruce1966us · Apr 23, 2004

The JD750 has the same engine (3T80u) as the YM2002D. The JD850 has the 3T80.

Thanks,
Bruce

kayssupply · Apr 25, 2004

I have a YM2002D. It is a powerhouse for it's size. The YMG2000 is a 3 cylinder that is basically a YM1802/YM220, but the YM2002 is a different machine. Most of the driveline will match the YM220 but not all. The sheet metal is a little different. I ordered a headlight bezel for a YM220 . It would fit the hole but the headlights were different. If I remember correctly the YM2020 was even a different size machine than the YM2002.