YM2010 Transmission Screen Location

Todd8665 · Oct 15, 2015

winston1 said:
Bottom left (sitting in seat) of transmission housing. 3 bolt flange.

Also, likely, directly opposite side of tractor than the hydraulic supply line to the hydraulic pump - the pump likely draws its fluid through the screen.

winston1 · Oct 15, 2015

ufengineer, I owe you an apology. I copied the wrong page. The one I copied was the 2210. Only difference is yours has the 2 bolt flange. Same place though. Sorry I mislead you. :ashamed:

ufengineer · Oct 15, 2015

Thanks Winston. This model has a cover with two bolts. The two vs three bolt cover is what was throwing me off. Apparently most models have a three bolt cover and only a few have a larger circular cover with two bolts. I was one of the lucky to have one with the latter.