I just bought a YM2210D grey market. So far it seems like a tight little tractor. I live on some really steep terrain. I turned around the rears and I am loading them with beet juice. I want to put some 4" rear wheel spacers on it. I cannot find anything. I found one fabricator but he is not making any for a while. Bora has a 15 week lead time due to steel shortages. Hoye Tractor does not have any. I am looking for a set or some information. I may try to find someone local to fab a set. I want to confirm my measurements so I don't spend a few hundred dollars and have them not fit. I have 9.5 x 24 wheels. It is a 6 bolt pattern. The hub measures 94mm, Wheel 95mm for the center. The bolt circle on the axel is measuring 94mm. Can anybody confirm that this is correct? If you have any leads on where I might be able to get some 4" spacers I would appreciate any info around buying, or making them. Also does anyone know of a more common tractor with the same bolt pattern ? John Deere, or US model Yanmar, Might be easier to buy a set for a US tractor with the same pattern. Thanks in advance....Don