YM3110 question

   / YM3110 question #1  

paulBurns

Member
Joined
Aug 29, 2003
Messages
41
Location
Carroll Co Tn
Tractor
Ym3110
This week I bought one and do not have a manual as of yet. I used it several hours today with a tiller and could not get the tiller to go to a set position easily. Rasing the lift lever resulted in the tiller not responding for a while then it would go all of the way up not just a little. Same thing on the lowering. I could not set the depth with any accuracy at all with the lift lever. Thanks for your thoughts.
 
   / YM3110 question #2  
sounds like you don't have position control on your tractor, some don't- either up or down, no inbetween
 
   / YM3110 question #3  
Unless you know for sure when the last time the hy/trans pickup screen was cleaned and fluid changed, I would start with that. A dirty screen can cause the erratic behaviour you describe. You should be able to tap the lever up or down and move the implement by fractions of an inch.
 

Tractor & Equipment Auctions

2016 FORD F-450 9FT SINGLE AXLE DUMP BODY (A51222)
2016 FORD F-450...
Case 1150G Crawler Tractor Dozer (A50322)
Case 1150G Crawler...
Quick Attach Hydro Slide Pallet Forks (A50514)
Quick Attach Hydro...
24 Foot Wells Cargo Enclosed Trailer (A50324)
24 Foot Wells...
2015 FREIGHTLINER CASCADIA TANDEM AXLE DAY CAB (A51222)
2015 FREIGHTLINER...
2020 INTERNATIONAL LT625 TANDEM AXLE SLEEPER TRUCK (A51222)
2020 INTERNATIONAL...
 
Top