Z930 - Question concerning one Joy Stick being too “over controlling” vs. the other

   / Z930 - Question concerning one Joy Stick being too “over controlling” vs. the other #1  

rmonio

Platinum Member
Joined
Aug 4, 2002
Messages
718
Location
New Market, MN
Tractor
JD 4600, JD B
On my new Z930M, the right joystick seems to be too over controlling (at least in my opinion). For example, if I’m driving a straightaway I cannot push the right joystick all the way forward (when the left is all the way forward) as it will push the mower to the left. This reminds me of when a car’s alignment is off…. Is this correct behavior? or should I have JD adjust it (it is still under warranty)?

Thanks!
 
   / Z930 - Question concerning one Joy Stick being too “over controlling” vs. the other #2  
There should be an adjustment some where to even them. On mine under the seat is a threaded rod for each side.
 
   / Z930 - Question concerning one Joy Stick being too “over controlling” vs. the other
  • Thread Starter
#3  
Ok. I’ll check and also refer to the owners manual. Thanks!
 
   / Z930 - Question concerning one Joy Stick being too “over controlling” vs. the other #4  
Yes there is an adjustment screw. Stand in front of the mower facing the seat and fold the control arms in. You should see the head of a screw on each arm facing directly toward you. Those are the ones that adjust the front/back of the arms.
 
   / Z930 - Question concerning one Joy Stick being too “over controlling” vs. the other
  • Thread Starter
#5  
Thanks. I'll look into that.

-Bob
 

Tractor & Equipment Auctions

Pequea 7ft Tedder (A47809)
Pequea 7ft Tedder...
Electric Pallet Jack (A47809)
Electric Pallet...
Milestone 72” all-hydraulic Seed Cutter (A47369)
Milestone 72”...
5ft Pasture Drag (A47809)
5ft Pasture Drag...
2012 JACK COUNTY  130BBL VACUUM TRAILER (A47001)
2012 JACK COUNTY...
2013 TRANSCRAFT/WABASH 48X102 STEEL FLATBED (A47001)
2013...
 
Top