Gil Case
Gold Member
I believe they are British tapered thread and they are not expensive once you find them.
Zerk/grease nipple fix
- Thread starter Buggs67
- Start date
- Views: 4450
OP
Buggs67
Veteran Member
Ordered from Zoro along with nipple covers.
bumperm
Veteran Member
OP
Buggs67
Veteran Member
PA hayseed
Platinum Member
I did all my service work today, cleaned all the grease fittings and replaced some broken/missing zerks. Anyone else have trouble getting grease in the fittings in the front end underneath the tractor? I removed every fitting, tested them to make sure they took grease, replaced them, and couldn't get grease in it. I even took it back out, took a screwdriver in and cleared out the grease in there to make sure there wasn't any dried grease blocking it, put it all together and it won't take grease. I have a new grease fitting on order for my grease guns, so maybe that is the issue. Do i need to raise the front end with the loader to get the grease in there? Has to be something wrong.
bumperm
Veteran Member
If grease won't go in, yeah, you might try changing or preferably removing the loading on whatever you are trying to grease to see if that helps.
