Search results

Anyone have a DK2 chipper? They advertise some units with a cyclonic chipper, others are a disk chipper. I know the concept behind the disk chipper, but what is a cyclonic chipper? I want to chip brush/limbs no bigger than 4", most much smaller. Some green material, some dry.

I thought this might have been covered somewhere already, but I can't find it. Example: A trailer with a 5880 lb payload rating (7000-1120=5880), with say 750-1,000 lbs on the tongue. Will this safely haul a 5900 lb excavator?

Does anybody know the thread size of a Kubota U25/U27-4 drive motor drain plug? It is part #RB511-78940. All but one plug on each side is stripped out. They use a 6mm allen. I would like to find a replacement from a hydraulic supplier that has a hex head on the plug. Thanks

This is a follow up to my Grease for Excavator thread. I switched to Lucas Construction and Mining grease with 5% moly (available in my area). It seems that a few fittings do not want to take much of it, other fittings overflow out the pin bushings like the old grease I was using before. Is moly...

I've been using Valvoline multi purpose red grease (# VV615) in everything for years with no problems. Just wondering if a grease with moly would be better for the swing bearing teeth and ball bearing in my u27-4. i would like to here what some other people use in their machines.

Getting ready for first final drive oil change on my U27-4. Manual calls for 80W90. Local Kubota dealer only sells Amalie 85W140 and states that is what they use in all of the excavators they service. Does this sound too thick of a viscosity? Just wondering. Get confused reading about Hypoid...

Kubota F3060 60" deck, GC-F30A grass catcher with hydraulic dump. 1560 hrs. Good condition. Runs very good. No leaks. $9500. Located in CT.

I am going to change my hydraulic filter on a new U27 when it hits 50 hrs. Owners manual recommends Shell Tellus S2MX32/S2MX46- not readily available in my area. Anyone know if Super UDT mixes with this fluid. I can't believe Kubota ships something without their own product in it. The owners...

I have just bought a used Kubota F3060 with 60" deck and the GC-F30A grass catcher. I want to change the hyd fluid and filter, but have no idea what brand of fluid is in it now. I know the manual recommends Kubota UDT or Super UDT and warns of mixing brands of fluid. Any suggestions would be...

Just wondering why on the CAM trailer web site they list a max gross trailer weight that is more than the sum of the axle weights. Are they adding the tough weight also to up the GVWR? Example: Full Deck Tilt P6CAM18FTT: GAWR 6000 per axle, curb weight 3080 , GVWR 13800, payload 10720. I figure...

Hi all. I have searched DOT sites and haven't found a direct answer. Are 4 G70 transport class 5/16" chains securing 4 points of a 6000# excavator (plus one additional chain for the bucket) enough for legal AND safe transport? FYI the G70 5/16" chains have a Working Load Limit of 4700#. What do...

Does anyone out there use a 9" trenching bucket? I have a 6" trenching bucket that is a beast to keep clean when trenching. Any ground moisture at all and I have to stop to scrape out bucket. Would the extra width of the 9" bucket make much difference? I have a 12" bucket that works ok, but I...

I'm comparing the Kubota U27 vs Yanmar Vio25. The Yanmar has a better warranty and hydraulic quick connect. Kubota has a better bucket break out force. Can any owners share why they chose their excavator over another brand? Any other 6000# excavators I should be looking at?

Hi all. Hoping a U17 owner will chime in. I am buying a slightly used U17. Picking it up in about two weeks. I plan to put a thumb on it. I have also found a very light weight 21" flail mower that would be great for mowing all of my thorn bushes. My question is, does the U17 have a valve or some...

I am looking to buy a 7000# dump trailer. I wanted to pull the trigger on a Big Tex 70SR, but it looks like it has a 16 gauge steel floor. Is that too light of material for a 5'x10' dump trailer? I want to haul a small excavator +/- 4000# and mostly mulch dirt and some rock. Thanks

Does anyone know if the Kubota U17 has a relief valve built into the aux hydraulics? I am looking at a U17 and will want to add a hyd thumb. Thanks

Does anyone with an F series mower have a problem with the left front of the mower deck scalping? I was checking out a new F2690 at my local dealer and noticed the 72" deck could very easily scalp some turf if that front left corner of the deck came up on a small hill/bump. Maybe an extra...

Is there anyone out there that has added after market work lights to their RTV 500? I am wondering if you were able to run the wires up through the roll bar or externally. Thanks.

I am mounting a Super Winch Terra 3500 winch on my RTV 500. The instructions state to put the solenoid near the battery, but that area is cramped. I would like to run power cables up to the front and put both the solenoid and the circuit breaker under the hood where I am sure they will stay...

I just bought a Kubota RTV 500 with the turf tires. I would like to get an extra set of rims for a more aggressive trail tire for hunting season. Has anyone purchased a second set of wheels from an on line retailer? The lug pattern is 4/110, but I'm not sure of the front/rear wheel offset. Any...

Anybody have any experience with this machine? Great warranty,3 yr basic, 4 yr power train, 5 yr electric. Good financing too. BUT it has a Kohler diesel engine. I think the engine is made in Italy.

I started this thread in the general forum, should have put it here. Does anyone know if the air filter location ( under the seat ) on the 1500 series JD front mount mowers gets dirty and needs replacement sooner than the older 1400 series with the air filter located above the engine? Is this...

Does anyone know if the air filter location ( under the seat ) on the 1500 series JD front mount mowers gets dirty and needs replacement sooner than the older 1400 series with the air filter located above the engine? Is this new location under the seat a pain to change? Thanks

Does anyone have a recommendation of a good reliable (and insured) hauler? Tractor weight 2315lbs 12' long 6'6" wide 5'6" high. St.Louis,MO to New Milford,CT. +/- 1,036 miles. Thanks

Torn between a new F2690 and a used F3680. Not interested in tier4 systems. I looked at a used F3680 with very low hrs had just a little engine oil on the tip of the dipstick. No oil leaks or excessive smoke that I could see. Owner could not explain. Engine oil light works, but did not come on...

Hi everyone. I cannot find any published data from Kubota on the hp requirement for the RCK60P-F39/RCK72P-F39 mower decks. Kubota does not publish PTO hp on the F series mower either. The F2690 has about 26 engine hp., not sure if that will power the 72" deck. I have a JD2520 with about 21hp PTO...

Does anyone have any experience with Plains Equipment Group in Crete Nebraska? How are they to work with regarding used equipment sales? Thanks

Hi all. Long time away from forum. Does anyone out there have a John Deere front mount mower? I am looking at a 1550 with a 62 or 72 inch side discharge deck. I'm a little concerned the 72" deck might be too much for the 24.5hp engine. My 2520 with 26 hp runs my 72' Woods mower fine. The higher...

Anyone out there have any experience with the new 50" Wicked Root Grapple from EA? Build quality/fit/finish etc. Looks like it might be the perfect size/weight for my JD2520.

Just a general question regarding warranties /customer service. I've been looking at MF 1532, Mahindra 3616 and JD 3320. Any one company better than the other as far as good customer service and dealing with warranty issues? Thanks

Went to a local MF dealer last week (CT). Was quoted $22,900 for 1532 HST, loader, R4s, 72 mos@0%. The MF web site config. gave me a price of $21,964. I would expect to pay full retail with the 0% finance, but this dealer is tacking on $936. Does this sound right?

Any opinions on parts availability for Mahindra / Mitsubishi built tractors. Looked at a MF 1532 and a Mahindra 3616. Nice tractors , but I worry a little about parts availability down the road for the owners of tractors not sold by JD,Kubota and NH.

This is for you 4105 owners, do you ever wish you had a 3 range hydro tranny? Ever need a lower gear sometimes? What are your thoughts. Been looking for a new machine for a year or so and I like the 4105, but drove a Mahindra 3616 yesterday w 3 range hydro. Nice machine for the money, stupid...

Hi all. Been looking for a larger tractor with more capable loader than my JD2520 and am leaning towards a JD4105. Went to the Mahindra dealer and liked the fit of the 3616HST and though I don't care for treadles, the Mahindra set up didn't seem too bad. I will need aux hydro for grapple. Any...

I went to the JD web site and pulled up the specs for a 200CX loader on a 2520. It gave a max lift weight of 800lbs at the pivot pin, and 557lbs 500mm form the pivot pin. This spec is with a (v) . Under those specs are another set of loader max weights with an (x) that gives another 200lbs or so...

I'd like to adapt a BH77 mechanical thumb to a KX008 excavator. Is there an owner of a BH77 backhoe that could provide me with the outside width of the BH77 bucket where it attaches to the stick with the main pin, or if you have the Kubota 6 position mechcanical thumb, the inside dimension of...

Hi everyone. Long time no post here. I've been wanting to up grade my 2520 for a slightly larger tractor with a more capable loader. The 4105 has all I want except it doesn't have dual brakes. I know it's a lower priced tractor, but a single brake on any tractor is beyond cheap. Two questions...

Has anyone priced a 3320 in the NorthEast recently? I checked a few dealers and they're about 9% off off the price I work up on the JD configurator. $eems a little high to me. Ronster

Has anyone installed the JD 3rd SCV valve kit (LVB25927) and the power beyond kit (LVB25603) on their 2520? I would like to add a small grapple or thumb to my FEL.

Does anyone have a W.R.Long grapple on their 2520? I was gonna order the 3rd hyd valve kit from the dealer and was told that putting a grapple on the 200CX loader was a bad idea. He claims the loader/mounting brackets are not up to the task. I'm wanting to move mostly brush. The RBG2 54" grapple...

I just bought a 2004 KX 008 and would like to put a thumb on it. Hydraulic would be best. It can't weigh alot due to the light weight of the machine. Kubota doesn't offer one. Anyone have any ideas?

One owner machine, bought new in 2001 (2000 model). 520hrs. 18 hp Briggs&Stratton. Elec start w/ pull back-up. Hyd disc brakes. Runs perfect. Goes anywhere-mud,snow,water. Seats 4 adults. Used for deer hunting but lost lease on property. $5000 ($9,995 new 2010 model). Located in CT. If...

Hi all. My gas cap doesn't clear the hole in the hood very well. The cap is pressed tight up against the hole in the hood towards the front of tractor. Slight bend in hood from this. I don't remember this problem when I first purchased the tractor 3 years ago, but noticed it last summer...

Has anyone had the opprtunity to run both the terramite tc5 and u15? I'm sure the Kubota can dig circles around the Terramite, but I was wondering how the digging forces compare. The Terramite web site doesn't give much info for comparison. I've got a chance to buy a U15 demo unit and just wanna...

A new TSC just opened up in my town. This store stocks a 48" rotary cutter made by Farm Force (Tartar Gate Mfg.). Has anyone heard of this brand? I'm wondering if it is any better than the KK brand. The sales person said it has a better quality paint job than KK. It looks pretty close identical...

I noticed the other day my 2520 can barely make it up a hill that my 23hp gear drive had no problem with. It's a little better going up in reverse. Is this normal for a hydroststic trans. to have problems going up steep inclines?

Is there a rule of thumb to apply to required PTO hp for a rotary cutter? I used to have a 60" King Kutter that I used with a 20 PTO hp Cub Cadet (gear drive). It seemed to work fine. Now I have a JD 2520 with 20.5 PTO hp but it's Hydro drive , and I'm wondering if I could still get away with a...

2520 60\" or 72\"MMM Can anyone let me know how they like the MMM on their JD2520. I'm thinking of going to a MMM so I can attach a Trac- Vac or some other material collection system. I will have to remove the mower often. If I go this way I'll have to get a set of R3s too.

The dealer installed a transmission heater in my 2520. I noticed in the parts manual that the heater element goes through the screen where the magnet normally goes. Do I not have a magnet now, or is the heater element also magnetized? Just wondering.

I picked up my 2520 last Wed. I'm glad I waited and didn't get the Kubota B2630/3030. The twin pedal HST and the FEL joystick are nice features . Very smooth engine. I put on Pat's Quick Attach system, it's not perfect, but it'll do. I'd like to rig a telescopic stabilizer for the lower links...

What other brands of attachments are compatable with the JD iMatch 3pt hitch system? Can any iMatch owners supply me with the pin width and lower pin to top link pin measurements? I'm about to order a JD 2520, but I'm not sure if I want/need the iMatch. Thanks.

I searched the archives and couldn't find anyone using a hydraulic top link cylinder from Northern Tool. A 2500 psi 2" bore, 12" stroke, 22" Closed Pin distance for $62.00. Would something like this work for a top link?

Has anyone bought from or had any dealings with Jeffersonville Garage in Jeffersonville,NY? They have very reasonable prices on Kubotas, but I was wondering about their service dept.,etc.

Anyone use either the Cyclone Rake or DR Lawn Vacuum? I'd like to know how they hold up to every day use. Any opinions would be appreciated.

I noticed that the B7610 has 24hp @ 2600rpm and the B2630 has 26hp @2800 rpm. Both engines have 68.5 cu.in. displacement. Would that mean if you wind the B7610 up 200 extra rpm it would produce 26 hp? I'm assuming the rated engine rpm gives you 540 rpm at the rear PTO.

I've checked prices on the link: www.kazez.com/~will/kubota.html. He lists MSRP, a good price , and a great price for each B model. So far I'm having trouble finding a tractor at the "good price" much less the "great price". Is this web site way off base with the prices? I know the list price...

Does anyone out there use a disc or plow with their B7610. I know (think) the 3 PH is strong enough to lift my KK Disc, but what about pulling it through the garden. I would leave the FEL on for extra weight.

What are some opinions on the minimum PTO hp to use a 72" RFM and a 60" rotary cutter? Moderate slope on the lawn and mostly over grown weeds for the bush hog.

For those of you that have an electric PTO switch, do you find the PTO engages smoothly or instantly like your foot slipped off the clutch? My concern is related to the 1428/1528 models.

I have only used gear drive tractors with a 2 stage clutch. Do tractors with an electric PTO switch somehow ease the PTO on or do they just engage suddenly like your foot slipped off the clutch. It seems to me I always eased the PTO on when I was using my old Brush Hog.

I've found a 1428 for $1200 less than a 1528 , but the dealer is 4 hrs from my home. The only one I've seen up close is the 1528. Can anyone give their thoughts on the differences of these two machines? By the way, the dealer says that I can have the new style 1520 loader put on the 1428. Is...

I was curious how easy/ not easy the engine oil change is on a MF1528. It looks like the eng oil filter is hard to get to, and I can't believe they left so little room to access the oil filler cap. I'm torn between the Kubota B3030/2630 and a MF1528 or 1428.

I almost signed on the dotted line line for a B3030, but backed off when I noticed how much the steering wheel (and deck) vibrated at all rpms. It's not nearly as smooth as the Case/NH , JD or MFs that I tried out. Was this machine a fluke or is this norm for the B series?

I'm know this is an old question, but I can't find it in the archives. Does the 1/4 inching valve on the B7610 and B7800 have an adjustment for the "up'" speed? The 3PH seems to shoot up real fast if you bypass the 1/4 inch feature. Also, has anyone found extendable lower links/stabilizers that...

Has anyone had any dealings with Frank Rymon and Sons Inc. in Washington, NJ? Just wondering how their service dept/ dealership is.

I drove a 1528 hydro today. A very nice smooth running engine. Dealer wanted $13,800 = $4K for FEL. That seems a little high. It doesn't even have telescopic stabilizers on the 3PT hitch for that price. Anyone know of the going street price for a 1528 or 1531 hydro in the Northeast?

Has anyone bought a Cub 7532? I just drove one today and thought it was a lot of tractor for the money. The steering wheel vibrated a little , but that's about all I could say against it. Just wondering if someone has any first hand knowledge of this model. I sold my 7234, and now I'm having...

Anyone know where I might find the best deal on skid steer 4 in 1 buckets? I live in CT. Thanks.

Is there some way to adjust the position of the HST pedal on a B3030? I'm 6' tall I find the pedal would be a little more comfy if it was moved forward a little. I sat on a JD that was next to a B2630 and really noticed how more comfortable the dual pedal design on the JD was.

72\"MMM for B3030 Has anyone bought/used the new RCK72-30B mower deck for a B3030? I feel a little funny buying a tractor model I haven't been able to test drive, much less cut some grass with. Still no dealers in my have a B3030 or B2630 assembled. After reading some posts on R4s vs Turfs, I...

Has anyone ever had a problem with the telescoping stabilizers breaking (on B-models )? They look like a real work saver , but also maybe one more thing to break. Just curious.

Has anyone out there had any experience with Roorks Farm Supply? They have competetive pricing on tractors, I'm just wondering how good their set-up and service is.

I just sold my Cub 7234 gear drive and am now ready to join the world of hydro drive. Unless something else really catches my eye, it looks like I'll order either a B2630 or a B3030. My old Cub had a 20hp PTO and the 2630 has a 19.5hp PTO. I would like to get a new light duty 60" rotary mower...

The Kubota brochure shows the B7610 as having an 18 hp PTO. It lists a 60" MMM as the biggest size available, but lists a 72" rear mount mower as available. Does the rear PTO have more power than the mid PTO? I currently use a Woods 72" rear mount finish mower on a 20hp PTO with no problems.

If I don't sell my 7234, I will need replacement tires for it. I would like to go from turf to R4 Ind. Titan has the front size I need, but I can't seem to find any R4 tire sized 41x14.00-20. Does this mean I would need to change my rims also? Has anyone had this problem?

I put my Cub on the market this weekend (CT). I'd like to get about 10K for it with the Koyker FEL, 60" King Kutter rotary mower, and an old rusty 60" blade. Does this sound about right for a 1995 tractor in very good condition with 630 hrs?

I was at a local dealer this morning trying to decide between the B7610 and the B7800. I noticed that the FEL brackets appear to be closer to the ground on the B7610 as compared to FEL brackets on the B7800. Neither machine had a MMM on it, but it looks like the MMM on the B7800 should raise at...

I want to purchase a new Kubota but I'm not sure of the type of tire to order. I've got turf tires on my old Cub 7234, but I was wondering if the industrial treads do much damage on lawns. I've got about 2 plus acres to cut, plus a little snow to push in the winter. My old Cub weighs about 2500...

I've noticed in spec sheets for the B series tractors the more expensive units use a position control valve instead of a quarter inching valve. Does this mean that with the quarter inching valve, the 3 pt hitch only goes up or down in 1/4" increments?

I had found a web site that listed some steet prices for most Kubota models and I can't seem to find it again. Does anyone know of recent selling prices on the B7800 and B2630 in the NY,NJ,CT area?

I went around today and tried on a few Compact Tractors. NH, MF, Kubota and last stop was back at a Cub dealer. The Cub Cadets just seem a lot more comfy for my 6' size. The 6284 seemed real nice. Has anyone bought a 6284 with the Cat engine? The machine was in the show room, so I wasn't able...

I notice the NH TC26DA and the Case DX26 have very similar appearance, specs, and even the FELs look the same. Are these tractors made in the same factory? The 0% financing sure looks good.

Does anyone know where the 5000 series Cub tractors are built? I know Daihatsu is based in Japan, but I wonder if they source out some of their production to Indonesia or elsewhere.

Due to a recurring problem with my right arm, I'm selling my Kubota ZD21 and buying something with a conventional steering wheel. Does anyone know if the tranmission problems with the 5000 series tractors that I've seen on some earlier posts have been fixed with the 2005 models? I'm leaning...

Has anyone found a substitute for the Kubota UDT fluid that could also be used as a hyd/trans fluid in a Cub Cadet 7234? I thought it would be nice if I had to stock only one type of fluid.

I'm changing the transmission/hydraulic fluid in my 7234 next week and was wondering if anyone has used something other than the Cub Cadet brand hydraulic transmission fluid. I've also got a Kubota ZD21 and was hoping I might find a fluid that would replace both the Kubota UDT fluid and the Cub...

Has anyone mounted a new front end loader on their tractor recently? I've got a model 7234 and I need a loader for it. The Cub dealer wants about $4000 for one. I think that's a little steep.

I need to buy a front end loader for my Cub Cadet 7234. I'm leaning towards a Koyker model 145 or 155. Does anyone have any experience with this brand? How they compare with a Woods or Bush Hog unit?