Search results

What is a good injector cleaner for a gasoline engine (GM pickup) that can be added to the gasoline tank? I have used Gumout and STP . May be wasting my money, don't know.

My wife uses my Kubota L4400 with FEL a lot. I want to get her a smaller tractor with FEL so she can use it for flower beds, moving small amounts of dirt, and similar work. I am thinking something about 20 hp, give or take a few hp. What would be a good easy to operate tractor for her?

Anyone on here have knowledge pertaining to a Duramax 2005. I am looking into the possibility of buying one with about 50000 miles on it. Would like to know the good, bad, and ugly on them. What kind of problems? What kind of fuel mileage? Any other thoughts on the 2500 HD Duramax.

New one on me. What is a Lister Type diesel engine. I may be familiar with it under another name.

Home Depot sells a Guardian 15000 Watt Portable Generator Model 04582 . Is this generator worth the $2,000 they want for it? In other words is it a good generator?

Anyone know the amp load for 10-2 w/ground wire. Thinking about putting in an outlet for my camper and I have some 10-2 wire.

What would be good to spray on lumber to prevent termites from eating it? I have some 2 X 6's in a building that are close to the ground and I want to reduce the possibility of a termite feeding frenzy.

My L4400 has a FEL and I want to have remote hydraulics so I can operate a wood splitter. Can they be put on a L4400 and the approximate cost?

I have this habit of going to flea markets and antique shops when I am looking for hand tools. Recently I bought a couple of nail bars for $5 each. They are old but in great shape and made in USA. Also have hammers and other tools I got at these places. To me these are better tools and most...

I have a L4400 and have a hard time raising the hood. Took it to the dealer to get the hood up so I can change the oil. The hood latch works but acts like something is binding the hood. Had to get it off of the hinges at the rear and then it would raise. The mechanic could not find anything...

My brother-in-law had a bunch of pines killed by beetles. My wife and I are getting ready to build a house and will be using the wood from the trees. What I need is a planer to dimension the lumber. Does anyone have a planer sitting around that is begging for a new owner so it can get some...

Go to KOGT.com and orangepolice.org to see how bad Orange, Texas got hit. Pretty amazing.

Saw some small skinny bottles of Lucas injector cleaner at Wally World. On the bottle said ti was good for gasoline and diesel engines. Is it any good for cleaning injectors (gasoline and/or diesel)? If so, is it worth the cost?

Will adding 2 cycle oil to your pickup truck gasoline tank increase HP or fuel effiency? Was wondering if I add a small bottle to my truck tank if it would improve performance when pulling a trailer? If not what could be added? I have a 6L gasoline engine in a 3/4 ton GMC. Will be hauling...

Going to pour a slab for a garage. I have heard about the cememt/concrete with fiberglass in it. Was told by some that I would not need rebar, only the fiberglass/cement mix. Someone please give me some feedback on the use of the fiberglass/cement mix. Will I need rebar and wire in the slab?

What are the oil specs for the hydraulic and transmission oil in a L4400 with a FEL? I have some hydraulic oil I bought for a Massey and was wondering if the same oil will work. My owners manual says to use Kubota oil. Someone makes the oil for Kubota and probably for other tractor...

Does anyone know if the L4400 will opeate on biodiesel without damage? Do not want to wipe out an engine.

Is there a site where I can cross reference filter numbers?

What are the specs on the hydraulic oil for a L4400?

Soon I will be changing the filters on my L4400. Anyone have numbers other than Kubota filters for this machine. If I can get filters at the parts store instead of driving 37 miles to the dealer, then I will do that.

On the Kubota site I posted that I was looking for a shop or service manaul for a Kubota L4400. Unable to find one. Soooo, I decided to broaden my search in hopes someone on this site could help. I have a used Kubota L4400 with about 150 hours on it. No problems just want a set of manuals...

Yesterday I purchased a used L 4400. Now I am looking for a service or shop manual. I have looked online and cannot find a manual for a L 4400. It seems all the other manuals can be found but not the L 4400. Anyone have a suggestion? Where can I get a service or shop manual other than a...

To make a short story long let me tell you where I am coming from. My first tractor was a Ford 801 Workmaster in the early 1960's. Every tractor I have owned had what would be considered standard shift. You know, a clutch and gears. I am going to start looking around for a new tractor. I...

Going to build a storm cellar. All the cellars I know of are made of cement. Is there a kit, like fiberglass or similar material, I can buy to build the cellar. May not be such an item but exploring the idea.

What would be a good guess for the axle rating for an old 26' camper I have. This camper is about 10-12 years old. It has two axles. I may use the axles to make a trailer. I am going to tear up the camper and thought it would be a shame to get rid of the axles if I can use them.

Can anyone recommend a decent to good home weather station. We live between Clinton and Shirley, Arkansas. Just went through a bad tornado. Had another one about year and half ago. We are becoming the new tornado alley. Want something to give us weather conditons and conditions suitable for...

Saw a JD 1520 for sale. Has a front end loader. Other than weather damage to the paint job (faded paint) the tractor looked to be in decent shape. Did not have time for a close look. Thinking about going back and have a better look. Tractordata.com says production stopped in 1972 for this...

Anyone have information about a home heating unit that burns biodiesel. I am going to build a house and investigating heating sources. Not sure how much it will cost to make my own biodiesel.

We will start construction on a new house next year. Have been considering a central vacuum system in the house. Would like some feedback on the following: Advantages - Disadvantages- Cost - Any input you can give is appreciated.

Is synthetic motor oil worth the price compared to regular motor oil?

What is the difference between the L and MX series?

Anyone on here know of a loquat that has redish colored blooms. My daughter has shurb, tree, bush, what ever. It has fruit and leaves like a loquat. All loquats I have seen have a white colored bloom.

Not sure if this should be in the Kubota section or general section. I am looking around for a new tractor. I looked at a Kubota L4400 with an Ansung 4044 loader. The way the FEL was attached to tractor caused me some concern. The loader is attached to the center of the tractor. Not to the...

Did the Allis Chalmers 5030 or similare model come in 4 WD? I am looking for a part for my Massey Ferguson 220-4 and I have been told this tractor is the same. They were both made by Toyosha. Have not been able to get the part from Massey Ferguson.

Looking for a site where I can cross reference a bearing. Need a bearing for the front end of a MF 4WD. I have the parts manual with the old part numbers. This is a Massey Ferguson 220-4 made in 1988. Dealer told me the bearing was not available. I am guessing other tractors used that bearing.

Does anyone know of a site where I can go to get reviews on different tractors. You know a site that will give the strengths and weaknesses of a tractor model.

Last November I had a tractor stolen. The thief sold it cheap to someone, who wanting to make a quick profit but not knowing it was stolen, placed it beside the highway with a for sale sign. The Sheriff's Deputy say the tractor. He took the pictures I provided with the report and then called...

Does Kubota make a 4 WD tractor in the 40 to 55 hp range that has front differential lock? If they do, what is the model number?

Going to change my exhaust manifold. It has been on there since 1988 so I expect the bolts may not be in good shape. My plan it to take a side grinder and grind off one side of the nut or get a nut splitter and split the nuts. I will do this to keep from twisting off a manifold bolt. Does...

Looking for exhaust manifold gaskets for a Massey Ferguson 220-4. If I cannot find them, can I use Garloc gasket material and cut some myself? I have used Garloc on 400 psig steam lines and it was good. What other type of gasket material will do?

Have a Massey Ferguson 220-4, 2 cyl diesel, that has a hole in the bottom side of the exhaust manifold. The hole is larger than my thumb and allows the exhaust to blow on the oil filter. So far have not been able to find a replacement online. Can I have a piece of metal welded over the hole...

Looked at a JD 1840. Would like some information. Years these were made? HP Any problems these tractors have? What are their strong points? Any help you can give is appreciated.

Saw a MF 165 diesel with fel for sale. What is year? HP? Good things about the MF 165? Bad things about the MF 165? What should I look for on the tractor. Sign on it says the front end and power steering is new. Any comments will be appreciated.

What is the horsepower for a Kubota L3430 D?

I have a Massey Ferguson 220-4. Yesterday a used tractor dealer told me the front drive was a constant velocity joint. Is this true? On one side I am leaking fluid and thought about repairing it myself. I have the shop manual. Is it difficult to repair? May have to replace some bearings...

How do I convert the watts to load. In other words, how can I take the watts, say 7000 watts, and determine what it will operate at my house. Is there a formula to help determine what a generator will do?

off-ML-744598-ML- Got nuttin' to do with Owning/Operating a Tractor. :)

Looking for a drum cradle that will hold a drum in the horizontal position. Want this to hook up to my 3 point hitch. My plans are to put a plastic drum in it and use it for a herbicide tank. Will be using a 3 pto operated roller pump.

Looking for input on spray rigs. The options are PTO driven and the ones with a 12 volt motor mounted on a tank. What is the advantage and disadvantage of each. I am going to spray herbicide on poison ivy and weeds.

Looking for some information on Branson tractors. 1. Who makes them? 2. What are the hp ranges? 3. How is the quality? 4. How do they handle? 5. What are some of the drawbacks?

Somewhere I read the Hinomoto and some Massey Fergusons were made by the same company. If this is true, are the parts interchangeable? My tractor is a Massey-Ferguson 220-4 and needs power steering. The Massey 220-4 did not come with power steering but if the Hinomoto has power steering...

Saturday I was using my tractor to do some pulling and noticed one of the front wheels was not pulling. The tractor is a Massey Ferguson 220-4. Any suggestions as to what may be wrong?

Recently bought a Massey Ferguson 220-4. It has a front end loader. That model did not come with power steering. Does anyone know were I can get a power steering kit for it. I will take used one.