Search results

Hello, Our L3130 started leaking oil from the left front axle final drive. The tire also has a good bit of of wobble when shaking it. I have read some of the threads on replacing the bearings and seal in the front axle. I have the bevel gear housing off, but does the bearing on the end of the...

Hi, I am thinking about a Keulavator cultivator for the L3130. Does anyone out there use one on a tractor compatible with a 3130? I have only seen a Keulavator on the internet @ the Agri-Supply site. Thanks, Smitty

I'm looking at a Super A Farmall. It is a 1951 model and it has a new carburetor. The main problem is the tractor will not idle; the engine runs almost wide open. I'm wondering if it is the linkage from the governor or a problem within the governor???? I would like to purchase the tractor...

Hi, I was pushing up some brush and hedge when a large piece of brush made its way up the inside of the right front tire, it bent the engine side cover, cracked the shroud and caused a small leak at the bottom of the radiator. The leak is very minute, say a drop every 20 seconds. Has anyone...

I need to get the hydraulic pressure checked on our L3130. The bucket curl is weak. The dealership is ~50 miles one way so the cost for mileage and service call charge is high. I want to buy the fitting that is required to check the pressure, but the dealership can't get it. Where do guys...

I have a practically new SQ 600 that uses a shear pin. It broke the yoke on the drive shaft (the dealer gave me some 10.9 shear bolts instead of 8.8) at the pto last Saturday. I found an old JD 205 Gyramor with a slip clutch. Does anyone know the hp rating for the gear box? Thanks, Smitty

Well, well, well, I was using the tractor today and I hit a small mound and guess what; the shear pin didn't shear but the yoke on the PTO did. I had already sheared a pin a couple of months ago a put a new one in that the dealer supplied when I got the tractor and implements. I saved the...

Where can I get a shop manual for an L3130 Kubota. I thought I&T would have one. Smittyd

Um Yes, Could someone out there with a L3130 with the LA513 loader measure the distance from the center of the bottom (boom) pin on the bucket and the center of the top (tilt cylinder) pin on the Direct Pin bucket and post it. I have a LA513 with the quick attach bucket. I would be much...

I looked at an L4400 a couple of weeks ago and the direct pin bucket tilt cylinder pins were toward the top of the back of the bucket. I have an L3130 with the LA513 loader so I know I'm not comparing apples to apples so to speak, but if the direct pin bucket for the L3130 tilt cylinder pins...

The 50 hour service will soon be due on our L3130 GST. The manual isn't clear on which oil to use -- UDT or Super UDT??? The manual gives the capacity, but it doesn't come out and specify which one UDT or Super UDT, so I'm guessing it's Super UDT. What do you other GST people use?? Thanks...

I have the quick attach unit for the bucket on my L3130. My question is about the direct pin bucket. Do the top pins for the tilt cylinders for the direct pin bucket mount more toward the top of the bucket than the quick attach pins do or are they about in the same place? The reason I am...

I have 25 1/2 hours on the L3130. I must admit I wasn't as used to it so to speak as I thought I was. I have about quit having withdrawals of trading in the 140 Farmall on the 3130. I love the LA513 loader. Back in January I had complained to a couple of my friends at work about the loader...

I had an excellent cultivating tractor; a 140 Farmall, but I traded it in on the L3130. On the 140 I had a front gang and a rear gang and it was a pleasure to plow with it, because it was an offset tractor. The L3130 GST is a 4wd with a LA513 FEL. I guess the front axle is not adjustable. I...

Don\'t sell your Kubota before you price a new one. I put my L3130 GST 4 WD with the LA513 in the Market Bulletin and I would have settled for about 16500. I hoped to sell it a get a L3830 4wd with a LA723 or a L4300 4Wd with a bucket (I learned Kubota no longer makes the L4300, but went to a...

I weighed my pickup today and it came in @ 5140# After I put a bucket of dirt on it it weighted 6460# So, not counting the weight of the bucket that comes to about 1320#. It was picking up more than I thought. That makes me feel better. Thanks for all the replies on the other post.

Um--Yes, I did what the dealer told me, he said to make sure I was pulling straight back on the lever and not to the left or right when picking up the bucket. It still will not raise above the level of the tractor hood when the bucket it loaded. I don't want to pay for a service call if there...

Is anyone familiar with L-E products? It seems I am the one of very few in my area who uses their engine oil.

If I want to get the liquid out of my rear tires, (they came from the dealership with a mixture of antifreeze and water) can I have the valve stem positioned at the bottom of the rim and take the valve core out and let what will come out?

Does anyone who owns an L3130 GST had any trouble with the wires on the left side and underneath the tractor getting pulled out while clearing brush? The tractor has a small guard to protect the wires, but I let a piece of privet hedge slip under the bucket instead of pushing it completely out...

Does the L4300 or L4400 have basically the same frame or set up as the L3400? The dealership near me doesn't have the L4400 or L4300, but it sounds like one tough, powerful tractor. I hear the L4400 took the place of the L4300, but the running gear didn't change only the "body style", is that...

Our toothbar from Markham Welding arrived yesterday. A friend of mine helped me install it. He welded a piece of 1/8" metal on either end of the toothbar mounting plate to make it extra snug. He hammered it onto the bucket cutting edge, it fit snug on the cutting edge. He suggested tack...

What do you think of the Quick Hitch? It mounts to the tractor 3 pt. hitch and you just back up to the 3pt. hitch implement hook up and go, with the exception of something with a pto shaft, then you will need to dismount and hook the pto shaft up. With Pats Easy Change I will have to hook up...

Is it okay to use the green on road diesel fuel in a Kubota L3130? The service station in Stapleton, GA. only sells the on road taxed version of diesel fuel. I will pay more for it , but all I have to do is drive a few hundred yards from my place to the station and fill up. I really would...

How do those Mahindras hold up after a few years of use? Are they fairly easy to get parts for? Are there any of you who have owned a Kubota and a Mahindra, and how did they compare as far as handling, power and operating?

I recently traded my 1975 140 Farmall in on a Kubota L3130 GST. I like the Kubota, it has a 513 fel and 4wd. I keep looking at the Mahindra site on the internet. This spring I plan to ride up to North Georgia to a large Mahindra dealership and take a look at some of the 35 hp models. These...

mahindra-ML-565531-ML-

Maybe this has been covered. When do you need to use the clutch with the GST other than when hooking up equipment to the 3 pt. hitch? Does anyone use the clutch when going from forward to reverse? Is it detrimental to use the clutch?

I apparently have the wrong quick attach for my L3130, LA513. When I contact the dealer tomorrow I am going to suggest he let me trade the quick attach (L2231A) and the bucket (L2234) for the direct pin (L2243) and a tooth bar. I am wondering what the prices are for each item. I don't have...

I have a Kubota L3130 tractor with a LA513 loader. The bucket is a L2234 with a quick connect. The quick connector number is L2231A. The tilt cylinders hit the lower part of the boom when dumping the bucket. I called the Kubota dealership and the salesman told me they would come get the...

Has anyone ever heard of an Atlas Disc Harrow. It looks like a good harrow.

Well -- I have the 3130 now. It rained last night so I don't want to get it muddy or dirty yet so I haven't tried it out. It is a good bit larger than the L3400. It is a 3130 GST-F. I have looked at the manual, but I can't find out what the "F" stands for. Also in the manual are many error...

Kubota L3130 GST-F 4WD R4 tires PS-IPTO-3Pt hitch Deluxe seat-tilt wheel Deluxe stablizers Flex lower links ..................14,200.00 LA 513 Loader L2230 66" Square Back Bucket Quick Attach (L2234) L2230A Quick Coupler ...............................3750.00 Are these prices in the...

I bought a Kubota L3400 4wd dt w/bucket. I traded in my 140 Farmall. I really liked the Farmall much better.