Search results

JJT and Fallon, Thank for your responses. I ended up missing out on the rake. I appreciate your feedback.

Jeff, Thank you for your reply. I am sure that I can buy tines and I can weld any framework issues, but I'm not sure if tines are something that are all the same as far as hole sizes and such or if I would have to drill out ( or try to in the hard spring steel ) to be able to mount new ones if...

Saw a 7' leinbach landscape rake for $750. I have two questions: 1. Did someone buy out leinbach? 2. Is the price too high? It seems they were selling less than that new. It is in good shape looking at the picture. 3. Can you get parts for their stuff? Whoops, that's 3 questions. ha, ha

Does anyone have one of these yet? I have just ordered one for my Work Master 55 and I have a few questions. Have you seen one on a Work Master? How does the subframe mount to the tractor? I'm sure to the loader frame and around the rear end, but looking for specifics if anyone knows or has seen...

I bought a gr2010 series mower this spring. I paid $7,000 for it and am quite dissapointed. The cut is not as good ( uneven side to side ) as my 3 point hitch mower that I was using. It runs terrible with the cheapo kohler motor. It backfires half of the time when shutting it off and seems to...

Has anyone installed turn signals on their Rtv 900? Does the kubota kit just plug in, or do wires have to be spliced? Does anyone have any close up pictures that they could share? Any custom mix and match pictures of what you've done, or seen, and taken a picture of would be fine. I'm trying to...

Hey, have any of you guys tried the "D.D. Fisher" fishing rigs? I just was on the ddfisher.net website, and it looks interesting. I would however, have to actually get out there with my kids and do it. I haven't had much free time on my hands yet this year. Any review of it would be great, by...

I have a leaky loader valve on the NH TC30, 7308 NH loader. It is leaking from the set screw/nut that adjusts the pressure for the loader. It is leaking all the time, even when the loader is not under load. I tried tightening it, but it didn't work. Is there an O-ring behind the set screw that...

Anyone know where there might be a simplicity sunstar repair manual? I have a friend that needs one.

I am curious if any of you guys own, or know someone who owns a husqvarna utv. I'm not in the market, as I just bought an RTV 900, but my real estate agent has one, and I was just wondering how they are. I really like the looks of the front hood and grill on them. They look tough. Daryle.

Well, I have just put some money down on a new rtv 900. I couldn't resist the 42 months 0% interest rate. They will probably be delivering it by this comming weekend. I am a little nervouse after seeing an earlier thread about Kubotas customer service, or lack there of. I'm hopeing that there...

Is this something that you guys are making, or is someone else contracted to make them for you? I like the looks of it. Any more pics of different angles? What do you think the price will be? 4x4? locking differentials? hydro trans? gas or deisel?? I like the orange as well. Much more info...

You guys that have 610 mules, or kubota rtv 900's, that replaced the factory tires; what size and brand of tire did you buy? How do they work? Can the 610 mule handle aftermarket agressive tires power wise? Pictures are great too. Thanks all. Daryle.

I have been wanting a utv for a couple of years now, and am still not sure which. Why; because they all have different features, abilities and prices. Wouldn't it be nice to design a utv that would have the best of everything? I know that the utv manufacturers don't want to clone each other, so...

Any of you guys have a sand/salt spreader for your utv? How does it work? Did you have to get heavier rear suspension for it? What utv is it on ( ranger, kubota, kawasaki etc. )? Thanks. Daryle.

Has anyone tried or really looked at the belmont tilt deck trailer ( the non power tilt ). What are your impressions of it. I'm thinking of buying and 18' for my tractor and such, but would like reviews and opinions first. Thanks. Daryle.

Does anyone have a TC30 with the "CCM" hydro top and side link cylinders; that run a NH757 sub-frame mounted backhoe? Do you have to remove the cylinders to mount the backhoe? I am wanting them to run my rear blade but don't want to have to remove them when mounting the backhoe. Thanks to all...

I am wondering if anyone has put the "CCM" hydro top and side links on their tc30, and if they will work with the NH 757 sub-frame backhoe, or if I would have to take them off to mount my hoe? Thanks! Daryle.

I am buying an RTV900 in a week or less. I need ideas on how to either protect the bed, make a new bed, etc. This is going to get used pretty hard! I am going to be clearing land and hauling rocks, dirt, crushed stone, gravel, stumps etc, etc. I want to either take the bed off and make a quick...

I am wondering how this price is from my local Kubota dealer. It seems high to me, which they are known for. :mad: It is a 2005 worksite model with 4x4,front bumper, winch, bedliner, and hydraulic dump bed and 52 hours on the meter. It doesn't show much wear. They want $10,000 cash price...

I am wondering if anyone has any information as to what rtv is best in the snow? Is it all in the tires, or are there better rtv's than others? I have taken my inlaws Mule ( the smaller engined one ), and it didn't do well up the logging road. It seemed to do alot worse than my four wheeler. The...

Does anyone "in the know" or out-of-the-know, heard of any talk of New Holland coming out with a UTV to compete with Deere and Kubota? That would be great, as I am a New Holland fan, and would love to see another Hydro trans machine to give yet another option. I have not heard anything myself...

I purchased a used NH 757 backhoe for my TC30 this year and I am wondering if the stabilizer legs are supposed to lift the rear of the tractor off the ground, or if they are just supposed to take "some" weight off from the rear end? Mine won't lift the rear off the ground. Is there an adjustment...

Does anyone have any price info on the MC mowers? Do the MC mowers do well on hills? I am thinking that they would do better than the zero turn mowers that have the front caster wheels. I'm thinking about the Mc22 4x4 but I don't know yet. Thanks for any info! Daryle.

I just bought a wallenstein 4" chipper for my New Holland TC30. It has hydraulic feed and it is awesome! I didn't run the max size material through it but it took my locust tree branches at 2" or better without any trouble. My locust is extremely hard and dulls a chainsaw very quickly. I am just...

I am going to be picking up a used New Holland 757 hoe this week. I have just put a deposit on it today to hold it until I can get back with the car trailer. My question is that it comes off from a tc29 and I have to put it on a tc30. Is the sub frame the same like the woods backhoes are for...

I am wondering which is a better hoe and if anyone has prices . I am considering only two brands; the first is a new holland 757 or 758 or the woods 7500 hoe. It looks like the two new holland hoes have stronger breakout as well as will dig a bit deeper when comparing the 2' and 8' flat bottom...

Gents, here is the situation that I am letting myself agonize about. I am toying with several ideas to spend all of my money. I could put up a garage, buy a backhoe for my TC30, or buy a bigger tractor to get more pto horsepower to eventually run stump grinders, wood chippers and things that I...

I have recently visited New Hollands web site and am wondering why the tc48 has more hydraulic flow than the tc55. Flow on the TC48DA is 12.03 gallons per minute (gpm) and 11.60 gpm on the TC55DA according to their web site. Why would the bigger tractor have slower flow? Is this a miss print...

Hi all! I am wondering if anyone has made or bought a quick attatch for their fel? I am debating making or buying one. The lift capacity on my tc30 is lower than the bigger tractors, so should I bother doing this where I might not be able to use the heavier skid steer stuff? If you folks think...